Bedienungsanleitung Sony xr c 7200 (Seite 14 von 48) (Englisch, Spanisch)

164254

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

CD1

2 2 Play

PLAY MODE ENTER

TRACKDISC

SUR EQ

CD1

2 4 Skip

PLAY MODE ENTER

TRACKDISC

SUR EQ

2 Press (LIST) repeatedly until you find the

desired disc.

3 Press (5) (ENTER) to play back the disc.

Notes

• To go back to the normal display, press (DSPL). Once a

disc name has been displayed for five seconds, the display

goes back to the normal playback mode.

• The track names are not displayed during MD playback.

• If there are no discs in the magazine, “NO Disc” appears

in the display.

• If a disc has not been assigned a custom file, “********”

appears in the display.

• If the disc information has not been read by the unit, “?”

appears in the display. To load the disc, first press a

number button, then choose a disc that has not been

loaded.

• The information appears only in upper cases. There are

also some letters which cannot be displayed (during MD

playback).

Selecting the specific

tracks for playback

— Bank/Custom File

(CD unit with custom file function)

If you label the disc, you can set the unit to

skip tracks and play only the tracks you want.

1 Start playing the disc and press (SHIFT).

Then press (3) (PLAY MODE) for two

seconds.

Bank edit mode

Note

If you have not labeled the disc, the bank edit mode does not

appear and the program edit mode appears. To go back to

the normal playback mode, press (3) (PLAY MODE) for

two seconds.

2 Press either side of (SEEK/AMS) to select

the track number you want to skip and

press (5) (ENTER).

The indication changes from “Play” to

“Skip.” If you want to return to “Play,”

press (5) (ENTER) again.

LST

4 SCHUBERT

ENTER

SUR EQ

CD1

4 SCHUBERT

NAMEDISC

SUR EQ

Displaying the disc memo

During playback, press (DSPL).

Each time you press (DSPL) during CD

playback, the item changes as follows:

z Elapsed playback time z Disc name

Clock Z

Erasing the disc memo

1 Press (SOURCE) repeatedly to select CD.

2 Press (MODE) repeatedly to select the CD

unit.

3 Press (LIST) for two seconds.

4 Press (DSPL) for two seconds.

“Delete” and the disc memo appear in the

display.

5 Rotate the dial to select the name you

want to erase.

6 Press (5) (ENTER) for two seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (LIST) for two seconds.

The unit returns to the normal CD playback

mode.

Locating a disc by name

— List-up (CD unit with custom file function

or MD unit)

You can use this function for the discs that

have been assigned a personalized name. For

more information on disc names, refer to

“Labeling a CD” (page 13).

1 Press (LIST) momentarily.

The names assigned to the disc currently

playing and the next disc to be played

appear in the display. The name assigned to

currently playing disc is flashing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony xr c 7200 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info