Bedienungsanleitung Sony XR-C750RDS (Seite 15 von 140) (Englisch, Portugiesisch, Spanisch, Schwedisch)

459939

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Changing the sound and

display settings

You can set:

•Clock (page 5)

•CT (Clock Time) (page 13)

•D. Info (Dual Information) to display the

clock and the play mode at the same time

(ON), or to display the information

alternately (OFF).

•Amber/Green to change the illumination

colour to amber or green.

•Dimmer to change the brightness of the

display.

— Select “Auto” to dim the display only

when you turn the lights on.

— Select “on” to dim the display.

•Contrast to adjust the contrast if the

indications in the display are not

recognizable because of the unit’s installed

position.

•Beep to turn on or off the beeps.

•RM (Rotary Remote) to change the operative

direction of the controls of the rotary remote.

— Select “norm” to use the rotary remote in

the factory preset position.

— Select “rev” when you mount the rotary

remote on the right side of the steering

column.

•Loud (Loudness) to enjoy bass and treble

even at low volume. The bass and treble will

be reinforced.

•LPF (Low Pass Filter)

•A. Scrl (page 16)

•Disc MEMO/TEXT name (Disc memo/CD-

TEXT name) to set the priority display item

when you connect an optional CD changer

with the CD-TEXT and disc memo function.

Note

The displayed item will differ depending on the source.

1 Press (SHIFT), then press (2) (SET UP).

2 Press (2) (SET UP) repeatedly until the

desired setting mode appears.

Each time you press (2) (SET UP), the item

changes as follows:

Clock n CT n D.Info n Amber/Green n

Dimmer n Contrast n Beep n RM n

Loud n LPF n A.Scrl n Disc MEMO/TEXT

name

Other Functions

3 Press (4) (n) to select the desired

setting (for example: “on” or “off”).

For the “Contrast” setting, pressing (4)

(n) makes the contrast higher, and

pressing (1) (N) makes the contrast lower.

4 Press (SHIFT).

When the mode setting is complete, the

normal playback mode appears.

Adjusting the frequency

of the subwoofer(s)

(XR-C850RW/C850RDS only)

To match the characteristics of the connected

subwoofer(s), you can cut out the unwanted

high and middle frequency signals entering

the subwoofer(s). By setting the cut-off

frequency, the subwoofer(s) will output only

low frequency signals so you can get a clearer

sound image.

1 Press (SOURCE) to select a source (radio,

tape, CD, or MD).

2 Press (SHIFT), then press (2) (SET UP)

repeatedly until “LPF” appears.

3 Press (4) (n) or (1) (N) repeatedly to

select desired setting.

Each time you press (4) (n) or (1) (N),

the cut-off frequency in the display changes

as follows:

LPF 120 Hz “ ” LPF 80 Hz “” LPF off

4 Press (SHIFT).

When the frequency setting is complete, the

display goes back to the normal playback

mode.

Set

LPF12‚Hz

SUR EQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony XR-C750RDS Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info