60326
101
Zoom out
Zoom in
Vorherige Seite
1/120
Nächste Seite
97
USING MULTI-ZONE CONFIGURATION
ADVANCED
OPERATION
Setting the remote control to the Zone 2
mode
The remote control is originally set to the main mode to control
the main zone. To control Zone 2 with the remote control, you
must first set the remote control to the Zone 2 mode.
1 Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
2 Press the numeric buttons to enter the code
number “9992”.
Controlling Zone 2 with the remote
control
The remote control is originally set to the main mode to control
the main zone, and the TRANSMIT indicator on the remote
control is turned off when the remote control is set to the main
mode.
When the remote control is set to the Zone 2 mode, POWER,
STANDBY, MUTE, and the input selector buttons are set to
control Zone 2. However, the rest of the remote control buttons
remain in the main mode.
The remote control automatically exits from the Zone 2 mode in
the following cases:
– when you do not make any operations within 10 seconds after
the remote control is set to the Zone 2 mode.
when you press a remote control button other than POWER,
STANDBY, MUTE, and the input selector buttons.
1 Press and hold POWER or STANDBY and
then press to set the remote control to
the Zone 2 mode.
Press POWER when the main zone is turned on.
Press STANDBY when the main zone is turned off.
The TRANSMIT indicator on the remote control
lights up while the remote control is set to the Zone 2
mode.
2 Press POWER to turn on Zone 2.
3 Press one of the input selector buttons to
select the desired input source of Zone 2.
y
To mute the audio output of Zone 2, press MUTE on the
remote control. Press MUTE again to resume the audio
output of Zone 2.
4 Press STANDBY to set Zone 2 to the standby
mode.
Note
Notes
TRANSMIT
CODE SET
Flashes
STEREO
1
EFFECT
STANDARD
5
SPEAKERS
9
MUSIC
2
SELECT
6
ENHANCER
0
ENTERTAIN
3
EXTD SUR.
7
NIGHT
10
MOVIE
4
DIRECT ST.
8
STRAIGHT
ENT.
TRANSMIT
Flashes
TRANSMIT
POWER
Lights up
While holding
down
STANDBY
or
POWER
CD
MULTI CH IN
SLEEP
CD-R XM
DVD DTV
MD
CBL
TUNER
V-AU X DV R
MUTE
STANDBY
101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

sony-yamaha-rx-v559

Suche zurücksetzen

  • Hallo,mein Display am reciever geht nicht an ,kann mir jemand helfen Eingereicht am 4-2-2020 18:18

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony Yamaha RX-V559 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony Yamaha RX-V559

Sony Yamaha RX-V559 Bedienungsanleitung - Deutsch - 118 seiten

Sony Yamaha RX-V559 Bedienungsanleitung - Holländisch - 118 seiten

Sony Yamaha RX-V559 Bedienungsanleitung - Schwedisch - 118 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info