812379
6
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
Commissioning of the installation
Filling of the installation
2. Connect the pressure hose of filling station to connection
port (9). The ball valve on connection port (9) is opened.
3. The ball valve (8) is closed.
4. Connect the return hose of filling station to connection port
(7). The ball valve on connection port (7) is opened.
5. Pump the mix of glycol and water into the installation with
the filling station until fluid leaks out at connection port (7).
Shut off filling station and close ball valve on connection
ports (7) and (9).
6. Open ball valve (8) and run installation manually for ca. 15
min - see installation instructions for controller-, in order to
bind entrapped air from the system in the drain set.
7. Afterwards, connect the return hose to the air venting unit
(3). The ball valve on the air venting unit is opened.
8. Connect the pressure hose of the filling station to con-
nection port (7). The ball valve on connection port (7) is
opened. The ball valve (8) is closed.
9. Again, pump mix of glycol and water into the installation
with the filling station until fluid leaks out at the air venting
unit. The installation is now completely filled and vented.
Drain installation
10. In order to maintain the necessary air volume in the install-
ation, a part of the installation has to be drained. In order
to do that, the necessary drain volume has to be determ-
ined see " Drain volume " on page 5 and drained.
11. In order to do that, connect a hose, that leads to a col-
lecting vessel, to the air venting unit (3) . The ball valve on
the air venting unit is opened.
12. Further, connect a hose that also leads to the collecting
vessel, to the filling unit (7). The ball valve (7) is opened.
Ball valves (8) and (9) remain closed.
13. Now, drain the exact volume according to prior determ-
ination from the system!
14. After the drain volume was drained, the ball valves on the
air venting unit (3) and the filling unit (7) are closed.
6
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sorel DrainSet wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sorel DrainSet

Sorel DrainSet Bedienungsanleitung - Deutsch - 12 seiten

Sorel DrainSet Bedienungsanleitung - Französisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info