Bedienungsanleitung Sorel LTDC (Seite 5 von 50) (Englisch)

812374

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Changes to the Unit

lChanges, additions to or conversion of the unit are not permitted without written permission from the manufacturer.

lIt is likewise forbidden to install additional components that have not been tested together with the unit.

lIf it becomes clear that safe operation of the unit is no longer possible, for example because of damage to the housing, turn the Unit off

immediately.

lAny parts of the unit or accessories that are not in perfect condition must be exchanged immediately.

lUse only original spare parts and accessories from the manufacturer.

lMarkings made on the unit at the factory must not be altered, removed or made illegible.

lOnly the settings described in these instructions may be set using the Unit.

Changes to the unit can compromise the safety and function of the unit or the entire system.

Warranty and Liability

The unit has been manufactured and tested with regard to high quality and safety requirements. The unit is subject to the statutory guar-

antee period of two years from the date of sale. The warranty and liability shall not include, however, any injury to persons or material dam-

age that is attributable to one or more of the following causes:

lFailure to observe these installation and operating instructions.

lImproper installation, commissioning, maintenance and operation.

lImproperly executed repairs.

lUnauthorised structural changes to the unit.

lUse of the device for other than its intended purpose.

lOperation above or below the limit values listed in the ‚Specifi cations‘ section.

lForce majeure.

Disposal and Pollutants

The unit conforms to the European RoHS 2011/65/EU for the restriction of the use of certain hazardous substances in electrical and elec-

tronic equipment.

Under no circumstances may the device be disposed of with the normal household waste. Dispose of the unit only at appro-

priate collection points or ship it back to the seller or manufacturer.

Description LTDC

About the Controller

The Temperature difference controller LTDC facilitates efficient use and function control of your solar or heating system possible while its

handling is intuitive. After every input step the suitable functions are matched to the keys and explained in a text above. In the menu 'meas-

urement values and settings' are help text and graphics in addition to key words.

The LTDC can be used for the various system variants, See " Hydraulic Variants " on page 7

Important characteristics of the LTDC are:

lDepiction of graphics and texts using a lit display.

lSimple viewing of the current measurement values.

lStatistics and system monitoring by means of statistical graphics

lExtensive setting menus with explanations.

lMenu block can be activated to prevent unintentional setting changes.

lResetting to previously selected values or factory settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sorel LTDC Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sorel LTDC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info