Bedienungsanleitung Soundcraft MPMi (Seite 21 von 60) (Englisch)

611474

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

19Soundcraft MFXi MPMi User Guide Issue 1210

PROBLEM SOLVING

Basic problem solving is within the scope of any user if a few basic rules are followed.

• Get to know the Block Diagram of your console (see page 20/21).

• Get to know what all controls and/or connections in the system are supposed to

do.

• Learn where to look for common trouble spots.

The Block Diagram is a representative sketch of all the components of the console,

showing how they connect together and how the signal ows through the system. Once

you have become familiar with the various component blocks you will nd the Block

Diagram is quite easy to follow and you will have gained a valuable understanding of

the internal structure of the console.

Each component has a specic function and only by getting to know what each part

is supposed to do will you be able to tell if there is a genuine fault! Many “faults” are

the result of incorrect connection or control settings which may have been overlooked.

Basic Troubleshooting is a process of applying logical thought to the signal path through

the console and tracking down the problem by elimination.

• Swap input connections to check that the source is really present. Check both

Mic and Line inputs.

• Eliminate sections of the channel by using the insert point to re-route the signal

to other inputs that are known to be working.

• Route channels to different outputs or to auxiliary sends to identify problems on

the Master section.

• Compare a suspect channel with an adjacent channel which has been set up

identically. Use PFL to monitor the signal in each section.

• Insert-point contact problems may be checked by using an insert bypass jack

with tip and ring shorted together as shown below. If the signal appears when

the jack is inserted it shows that there is a problem with the normalling contacts

on the jack socket, caused by wear or damage, or often just dirt or dust. Keep a

few in your gig tool box.

If in doubt please contact Soundcraft customer support.

PRODUCTS UNDER WARRANTY

UK customers should contact their local dealer.

Customers outside the UK are requested to contact their territorial distributor who is able

to offer support in the local time zone and language. Please see the distributor listings

on our website (www.soundcraft.com) to locate your local distributor.

OUT-OF-WARRANTY PRODUCTS

For out-of-warranty consoles purchased in the United Kingdom, please contact the

Customer Services Department (e-mail: soundcraft.csd@harman.com) at the factory in

Potters Bar, Hertfordshire: Telephone +44 (0)1707 665000.

For all other out-of-warranty consoles, please contact the appropriate territorial distributor.

When mailing or faxing please remember to give as much information as possible. This

should include your name, address and a daytime telephone number. Should you experi-

ence any difculty please contact Customer Services Department (e-mail: soundcraft.

csd@harman.com)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundcraft MPMi Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundcraft MPMi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info