Bedienungsanleitung Soundcraft Si Impact (Seite 101 von 132) (Englisch)

611463

101

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

User Manual

10.1: REVERBS

LEXICON FX > REVERBS

10.1: LEXICON FX > REVERBS

Reverberation (or “reverb” for short) is the complex effect created by the way we perceive sound in an

enclosed space. When sound waves encounter an object or boundary, they don’t just stop. Some of the sound

is absorbed by the object, but most of the sound is reected or is diffused. In an enclosed space, reverb is

dependent on many features of that space, including the size, shape and the type of materials that line the

walls. Even with closed eyes, a listener can easily tell the difference between a cupboard, a locker room and a

large auditorium. Reverb is a natural component of the acoustic experience, and most people feel that

something is missing without it.

Halls

SMALL HALL, LARGE HALL, DRUM HALL, VOCAL HALL

A Hall reverb is designed to emulate the acoustics of a concert hall – a space large enough to contain an orchestra

and an audience. Because of the size and characteristics,Halls are the most natural-sounding reverbs, designed to

remain “behind” the direct sound – adding ambience and space, but leaving the source unchanged. This effect has a

relatively low initial echo density which builds up gradually over time.

Vocal Hall and Drum Hall reverbs are specically tailored for those uses. Vocal Hall has as lower overall diffusion

which works well with program material that has softer initial transients like a voice. Drum Hall has a higher diffusion

setting which is necessary to smooth out faster transient signals found in drums and percussion instruments.

In addition to general instrumental and vocal applications, the Hall program is a good choice for giving separate tracks

in a mix the sense of belonging to the same performance.

Plate Reverbs

SMALL PLATE, LARGE PLATE, DRUM PLATE, VOCAL PLATE

A Plate reverb is a large, thin sheet of metal suspended upright under tension on springs. Transducers attached to the

plate transmit a signal that makes the plate vibrate, causing sounds to appear to be occurring in a large, open space.

The Plates in the Vi4 FX units model the sound of metal plates with high initial diffusion and a relatively bright, colour-

ed sound. Plate reverbs are designed to be heard as part of the music, mellowing and thickening the initial sound.

Plate reverbs are often used to enhance popular music, particularly percussion.

Chamber Reverb

Historically, recording studio chambers were oddly shaped rooms with a loudspeaker and set of microphones to collect

ambience in various parts of the room. Chamber programs produce even, relatively dimensionless reverberation with

little colour change as sound decays. The initial diffusion is similar to the Hall programs. However, the sense of size

and space is much less obvious. This characteristic, coupled with the low colour of the decay tail, makes these pro-

grams useful on a wide range of material - especially the spoken voice, to which Chamber programs add a noticeable

increase in loudness with low colour.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundcraft Si Impact Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info