Bedienungsanleitung Soundcraft Signature 22MTK (Seite 19 von 55) (Englisch)

611470

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

16, 22, 22MTK User Manual

3.1: INTRO TO I/O

INPUTS & OUTPUTS > INTRODUCTION TO I/O

3.1: INTRODUCTION TO I/O

The Signature console offers a choice of industry standard audio inputs and outputs. All Jack and XLR

inputs are balanced. Below are some terms used in this manual and on the console labelling that may

be of use to you.

AUX (Auxiliary) Output

An output bus made up of the summed Aux

contributions from input channels. In other

words, the AUX1 output will be a mix of all input

channel signals, with levels controlled by the

AUX1 controls on the individual input channels.

Auxiliary mixes are used for many purposes -

alternative mixes for monitoring, processing by

external FX units, and more.

Balanced

A ‘Balanced’ signal (Balanced Line) is one where

the signal is split between two conductors with

the same impedance / impedance to ground.

At a differential input, the differences between

thetwoconductorsareamplied,soanynoise

aquired between output and input is rejected

(common-mode rejection).

GRP (Group)

An output bus made up of the summed contri-

butions from any inputs routed to the Group. For

example, all inputs with their 1-2 buttons pressed

will be added to the GRP1 and GRP2 mixes. The

pan / balance control determines how the signal

is proportioned between the Group 1 and Group

2 busses (Group 1 left, and Group 2 right).

Hi-Z

High Impedance. Guitar pick-ups generally have

‘high impedance’ outputs and therefore require

asignicantlyhigherthanusualinputimped-

ance when plugging them directly into a console

(straight from the guitar plug - not via an amp

or a microphone). Hi-Z Inputs provide this. On

the Signature console selected inputs have Hi-Z

input switches to accomodate Hi-Z sources.

Jack

This is the long, quarter-inch connection most

commonly used on the signature console for

line level inputs and outputs such as keyboards,

external FX processors, playback and recording

devices, and so on. All Signature-series Jack

sockets are ‘Tip-Ring-Sleeve’ 3-pole types. Jack

outputs are impedance balanced.

Line

For inputs and outputs this refers to a line level

signal. This is a higher voltage signal than ‘mic

level’.

Mic

Microphone. For inputs and outputs this refers to

a mic level input. This is a lower voltage signal

than ‘line level’.

MST (Master)

Master Stereo Output: The main stereo Group

output made up of the summed contributions

from any inputs routed to ‘MST’ with their ‘MST’

buttons.

RCA

The small line-level connector commonly found

on consumer playback equipment. RCA inputs

are provided for the 15/16 (Signature 16) and

21/22 (Signature 22 / 22MTK) stereo input

channels (Playback Channels).

USB - Universal Serial Bus

Standard serial data connection used by the

Signature console for sending and receiving

digital audio streams.

XLR

The round, three-pin connections. On the

Signature console they are used for microphone

inputs and the main stereo outputs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundcraft Signature 22MTK Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info