Bedienungsanleitung Soundcraft Vi 3000 (Seite 24 von 202) (Englisch)

611458

Zoom out

Zoom in

Vorherige Seite

1/202

Nächste Seite

4.3: INPUT CHANNEL > DYNAMICS

Vi3000 USER MANUAL

4.3 INPUT CHANNEL > De Esser

Vi3000 USER MANUAL

4.2 4.2: Hardware > DANTE / MADI Switching

4.2: Hardware > DANTE / MADI Sources

The Dante/MADI interface gives the Vi3000 a lot of exibility for recording shows, Virtual Soundchecking or interfacing

with third party MADI or Dante-enabled equipment such as signal routers or system processors.

The interface comprises an input (64ch) in each format and an output (64ch) in each format. The outputs are fed by a

common signal source which is available to any channel or bus via the Dante/MADI buttons within the Local tab of the

console’s output patching matrix. The patched signal is fed to both Dante and MADI outputs simultaneously.

The inputs are selectable using a global switch in the Menu-Settings page of the console to choose either the Dante or

the MADI port as the active input. Whichever of these is selected will appear in the Local tab of the input patch matrix

in the console and will be labelled Dante or MADI as appropriate. Only one input can be used at a time.

Recording

64ch recording/replay is possible via the MADI interface using a third-party MADI interface such as RME MADIface,

in most cases the recording software can be set to take its clock source from the console’s MADI stream. Alternatively

the console’s Wordclock Out can be used to drive the recording software or router, or the console can be slaved to the

other equipment’s clock via Wordclock In.

Alternatively, 64ch recording/replay can be achieved via the Dante port, by simply installing a copy of the Dante Vir-

tual Soundcard driver (DVS), available from the Audinate website. A free one-off license token is included with every

Vi3000 console -see the documentation packaged with the console. The license token number is used on the Audi-

nate website to enable the issuing of a license key code which is then entered into the DVS boot screen to unlock the

software. Dante Virtual Soundcard is available in PC and Mac formats and allows the the standard ethernet port on the

computer to become visible as a 64ch input/output low-latency audio interface from any audio recording or processing

software.

Interfacing to another Dante-enabled device or network

The Dante interface allows connection to any other Dante-enabled device, either directly or via a network switch,

and using either normal or redundant connections depending on how the primary and secondary Dante ports of each

device have been congured. Although the patching of signals to/from channels or busses in the console is done via

the console’s patch matrix, the routing of those 64 in and out signals within the Dante network has to be set up using

a free software application called Dante Controller, available from the Audinate website and running on either a PC or

Mac external computer. Using this software it’s possible to make connections on an individual channel basis between

the Vi3000’s 64ch Dante interface and all other Dante equipment on the network.

DANTE / MADI Interface and switching notes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundcraft Vi 3000 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info