Bedienungsanleitung Soundcraft Vi 3000 (Seite 89 von 202) (Englisch)

611458

Zoom out

Zoom in

Vorherige Seite

1/202

Nächste Seite

Vi3000 USER MANUAL

9.2 9.2: MUTE & VCA GRPS > VCA GROUPS

9.2 MUTE & VCA GRPS > VCA GROUPS

VCA Groups conguration is started by pressing the MUTE & VCA GROUPS [SETUP] button. When you press a VCA

Master [SOLO/SEL] button you can assign channels to that VCA group with their individual [SOLO/SEL] buttons, and

also access VCA group options - including labelling - in the Master Bay Vistonics. See below for more information.

You can select EITHER output chanels OR input channels to be part of a normal VCA group.

In order to assign VCAs, the VCA masters [SOLO/SEL] buttons have to be made available by selecting the appropri-

ate Master Bay Fader Pages layer - [VCA] for VCA masters 1-8, or [E] for VCA masters 9-16.

VCA Master level at setup

The assignment of VCAs should be done with the channel or group faders and the VCA master, to which assignment

is being made, being at or near a nominal operating level. That is, don’t assign a VCA master to a channel or group if

the VCA master is at -40dB while the channel or group is at 0dB. There are 0dB buttons for VCA masters avilable in

VCA group conguration mode.

VCA Group Operation

VCA and 'E'

Buttons Active

Fader Pages buttons for

mapping VCAs to the

Master Bay faders.

The [VCA] button maps VCA masters 1-8 to the eight

Master Bay faders. The [E] button maps VCA masters

9-16 to the eight Master Bay faders.

VCA Masters 1-16 can be assigned to any Output Fader

page from A to E, along with Bus Output faders using the

User Dened fader page setup. The VCA page cannot

be remapped and always contains VCA 1-8.

Select VCA

Range

VCA Masters

[ON] Buttons Inactive Active

Master On/Off button for

all of the VCA's member

channels.

If a channel that was previously on is turned off by the

action of a VCA Master [ON]/Off button, the channel’s

[ON] button will illuminate in red to distinguish this condi-

tion from a manually 'off' channel.

The VCA Master On/Off switch itself has only 2 states,

and always illuminates red when off, and green when on.

All VCA

Members

OFF (muted)

All VCA Mem-

bers ON

VCA Group

Fader Low Range

An offset dB level for

all channels that are

members of the VCA

Group.

• When a VCA master fader is moved, the contributing

channel fader levels remain unchanged.

• If a channel is assigned to more than one VCA Group,

the resultant offset applied to the channel is calculated

as the arithmetic sum of the dB values of each VCA

Master.

• Any VCA master fader reaching –innity dB (fader at

lowet position) will set all member channels to –innity

dB, regardless of other Master fader settings.

• The maximum gain applied to a member channel as the

result of the channel fader setting plus offsets from VCA

Master faders is limited to +10dB.

-innity

VCA Master

Solo/Sel Inactive Active

A master Solo button for

all of the VCA's member

channels.

Depending on the setting of the AUTO button in the

Monitor Setup page (SOLO section), activating a VCA

Solo will result in PFL (if the group only has one member

channel) or AFL (if the group has more than one member

channel).

Otherwise the VCA solo will follow the setting of the PFL/

AFL switch in the Monitor Setup page.

Normal Soloed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundcraft Vi 3000 Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info