Bedienungsanleitung Soundcraft Vi 3000 (Seite 138 von 202) (Englisch)

611458

138

Zoom out

Zoom in

Vorherige Seite

1/202

Nächste Seite

4.3: INPUT CHANNEL > DYNAMICS

Vi3000 USER MANUAL

4.3 INPUT CHANNEL > De Esser

Vi3000 USER MANUAL

14.4.2 14.4.2: SNAPSHOT FILTER > GLOBAL FILTER

14.4.2: SNAPSHOT FILTER > GLOBAL FILTER

14.4.2: Global Filter - Snapshot & Show Isolation

Isolate [ISO]

Select channels, groups

of channels, and

parameter blocks, and

individual parameters

to be part of the Global

Filter.

To quickly Isolate a whole channel or bus from the snapshot recall, press its [ISO] button.

The channel strip border on the Vistonics screen changes to purple to indicate the 'All

Isolated' state. To quickly isolate groups of channels or busses, the Gang function can be

used.

To isolate parts of a channel or buss you can use either the [ISO] button, or put the whole

desk into Global Edit mode.

With an [ISO] button held, simultaneously touch the part of the channel strip that you want

to isolate, in the touch screen. A purple LED appears in the top corner of the block to

indicate that the block is isolated. To isolate an individual parameter, touch the Vistonics

controls for the parameters you want to isolate. You can either zoom into the function block

before selection, so the parameters within that block are already mapped onto the VST

area, or touch and hold a screen block as well as the [ISO] button - that will zoom into the

parameters for the block.

Global Filter

Enable Active

Activate Global Filter

With the Global Filter activated, 'ISO' selected channels

and parameters will be isolated from snapshot recall.

Global Filter-

ing Enabled

Global Filter

Edit Mode Inactive Active

Activate Global Edit

mode.

All desk parameters are available for adding to the Glob-

al Filter, without having to hold down an [ISO] button.

Normal Oper-

ation

Mode ena-

bled

Load ISO With

Show Active

Enable or disable

Global Filter for Show

When set to YES the console ISO settings will be

cleared and overwritten by loading a new Show le. Set

this to NO to protect isolated sections of the console

from being overwritten by a new Show le.

Show Filter-

ing Enabled

To get manual control back while in a sequence of cues - either of a whole channel, groups of channels, or an element

within a channel, you can use Global Filtering. The console [ISO] buttons are the main tools for this. Once a parameter

is isolated, that parameter will remain under manual control regardless of which desk snapshot is recalled – hence the

term Global lter; however, controls that are isolated can still be stored, so you can update snapshots with the manu-

ally adjusted changes at any time.

To isolate channels, busses, or parts of channels and busses you can use either the [ISO] button, or put the whole

desk into Global Edit mode.

The Global edit lter (LOAD ISO WITH SHOW) can also be used to isolate aspects of the console’s set-up from entire

Show loads. So for example, if you have an engineer who brings a pre-congured show le to a shared console at a

festival, you can isolate the console’s output settings, which would normally be congured specically for the venue,

and protect them from being over-written by the new Show le.

The Global Edit button puts the whole desk into Edit mode so you don’t have to hold the [ISO] button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundcraft Vi 3000 Seite 138

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info