Bedienungsanleitung Soundmaster CDMP 9933PRT (Seite 9 von 16) (Englisch)

562117

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

DUBBING (DECK B) TO (DECK A)

MAINTENANCE

This unit enables you to duplicate a pre-

recorded tape to another tape by using the

unit-in double deck mechanisms. It is

performed only one wa

y, from the DECK B

(playback) to DECK A (

recording).

Dubbing at normal Speed

Note:

Be sure the HIGH SPEED DUBBING switch

is SET

AT NORMAL in order to record

at no

rmal speed.

Press the POWER switch to ON.

2. Set the

TAPE function selector.

3. Insert a p

re-recorded cassette into the

DECK B and a blank cassette into the

DECK A.

Press the DECK A PAUSE button and

then p

ress the RECORD button.

Press the DECK B PLAY button to start

dubbing.

6. Adjust the VOLUME & EXTRA BASS

cont

rols to desired sound level and

sound equalization.

Dubbing at High Speed

This unit is equipped with a HIGH SPEED

DUBBING system which allows duplicating

a p

re-recorded tape at approximately two-

thi

rds the time of the duration at normal

speed.

Slide the HIGH SPEED DUBBING switch,

and follow the same p

rocedure as instructed

in "DUBBING

AT NORMAL SPEED".

When dubbing a p

re-recorded cassette tape

at HIGH SPEED in

TAPE function, a

chattering sound is hea

rd. To avoid this, set

the VOLUME cont

rol to a minimum or set

the desi

red FUNCTION button according to

the sou

rce to be heard.

Note:

When the dubbing at HIGH SPEED is in prog

ress,

do not

release the HIGH SPEED SWITCH, since

this will vary the speed of the program and ruin the

recording.

Power Switch

After using the unit, turn off the power by

releasing the POWER switch.

Cleaning the unit

To keep the unit clean, simply wipe with a soft

clean cloth moistened with plain lukewarm

wate

Cleaning the Heads

To ensure the continued high performance

of your unit, periodically clean the heads and

pinch rollers to prevent accumulation of dust

or tape oxide deposits. Failure to clean these

parts may result in inferior sound quality,

dist

ortion of recorded sound, deterioration

reproduction of high frequencies, and

inconsistent tape speed.

1. Open both cassette compartment lids.

Moisten a cotton bud with head cleaner

or methylated spirit and apply to the

faces of heads, rubbing gently until all

traces of dirt or oxide a

re removed.

Also clean the surfaces of the pinch

rollers and the capstans.

y, clean and polish the faces of the

heads with a piece of cloth.

Stylus (needle) Replacement

Replacement of a wo

rn stylus can be easily

accomplished as follows.

1. Raise the "

Tone Arm."

To remove the old stylus, pull out the

stylus assembly in the di

rection shown,

holding the head shell with other hand.

3. Then install the new stylus by pushing it

gently into the cartridge (hold by the

edge to p

revent damage to stylus) until it

clicks into place.

Cartridge

Stylus assembly

Cotton Bud Capstan

EarseH ead Pinch Roller

Record/Play Head

Cotton Bud Capstan

Pinch Roller

Play Head

TAPE B

TAPE A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster CDMP 9933PRT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info