Bedienungsanleitung Soundmaster DAB450 (Seite 6 von 9) (Englisch)

642505

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

DAB450 / English Instruction Manual

DAB display information

When listening to a DAB station you can change the information that will appear on the second line of the display.

There are several different types of information that are sent by the broadcaster.

Press the ‘Info’ button on the top of the radio to cycle through the different information options.

Dynamic Label Segment (DLS) - this is scrolling text information supplied by the broadcaster.

Signal Strength - An empty will appear on the second line of the display to indicate the minimum signal strength for

acceptable listening. The row of solid rectangles indicates the actual signal strength that you are receiving. The

stronger the signal, the further to the right the row of solid rectangles will be.

Program Type (PTY) - such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’

Multiplex Name - displays the broadcasting area and collection of radio stations on this frequency e.g.: ‘DR

DEUTSCHLAND’.

Channel and Frequency - e.g.: 12B 225.648 MHz

Signal error - This is displayed as a number between 0-99.

It would not be possible to satisfactorily listen to a radio station with a signal error rate of 30 or above. Try adjusting

the aerial or relocating your radio to improve reception.

Data rate information - The data rate at which the signal is being transmitted.

Time and date - supplied by the broadcaster.

Dynamic range control

1. In DAB mode, press the “Menu” button, press the “Prev” or “Next” button to select “DRC Value”.

2. There are 3 levels of compression: DRC Off - no compression. This is the default setting.

DRC Low - medium compression

DRC High – maximum compression

3. The current DRC setting will display when you turn into DRC Value.

4. Use “Prev” or “Next” button to scroll through the 3 compression level options available and press “Select”

knob to ‘select’.

5. Press ‘Menu’ to turn back to DAB stations.

FM RADIO

If you were listening to an FM station when you switched the radio off then this station will be automatically

selected when you switch the radio back on.

Tuning to an FM station

1. If you are not already in FM mode, Press and release the ‘DAB/FM’ button to go to FM mode.

2. Rotate dial wheel in the front of your radio to choose the frequency band. It will stop and begin to play

the station if there is station.

Note: If reception is still poor adjust the position of the aerial or try moving the radio to another location.

FM Mode can not preset FM station and scan FM station.

HEADPHONES

You can connect headphones with a 3.5mm plug (not included) to your Radio. The stereo headphone socket can

be found on the back of the Radio at the bottom. When you have headphones connected the radio speaker is

switched off and all sound is via the headphones.

Note: Always keep the volume within reasonable limits.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster DAB450 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster DAB450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info