Bedienungsanleitung Soundmaster iP1055 (Seite 5 von 7) (Englisch)

562040

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

 



iP1055 / English manual



ENG 3

OPERATION INSTRUCTIONS

Setting time using iPhone / iPod time Sync

The clock radio time sync feature allows you to sync the time setting on

the clock radio to the time from your iPhone or recent model iPod(iPod touch,

iPod nano and iPod classic; older iPod models such as iPod mini do not

support this feature).

1. Plug the AC adaptor cable into the AC Adapter jack located at the back of

the unit, time sync flashes on the lower part of the display.

2. Once sync is completed, time updated will appear on the display.

3. If sync was not successful, sync failed will appear on the display. If this

happens, please try again, with a different iPhone / iPod if needed. If sync

still fails, please set time manually.

iPhone time is automatically updated to the correct time via cell phone towers,

the time on your iPod is accurate only to the time on the computer the last time

the iPod was synced to it. It’s possible to have up to 59 seconds difference

between the clock radio and synced iPod / iPhone.

Setting clock Time (manually)

With the power off, press and hold the clock set/memory button ; “12Hr” will

blink. Press the Tune UP or Tune DOWN button to set the unit to the 24 hour

(24 Hr) mode or 12 Hour (12Hr) mode. Press the clock set/memory button

and the hours will blink. Press the Tune UP or DOWN to set the current hour,

then press the clock set/memory button again; the minute digits will blink.

Press the Tune UP or Tune DOWN to set the current minutes.

When done and you press clock set/memory button once again and the

display time will blink 4 times to indicate the current time is set.

Setting Alarm Time

To preview the alarm time. Press the ALARM button once.

While the display is showing the alarm time and you hold the ALARM button

for 3 seconds and the hours will blink.

Press the Tune UP or Tune DOWN to set the alarm hour.

Press the ALARM button again; the minute digits will blink. Press the Tune UP

or Tune DOWN to set the alarm minutes.

Press the ALARM button and you can change the sound mode (Buzzer, Radio,

iPhone / iPod

) for the alarm.

Press Tune UP or Tune DOWN to choose different sound mode. The alarm

volume will gradually increase. Then press the ALARM button when done.

To delay the alarm, press SNOOZE. It will come on again in approx. 9 minutes.

You may repeat this cycle several times during the alarm cycle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster iP1055 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster iP1055

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info