733777
14
Zoom out
Zoom in
Vorherige Seite
1/97
Nächste Seite
IR1450 / English Instruction Manual
2
BATTERY OPERATION
This unit uses 4 UM-3/AA/R6 size 1.5V batteries (not included). Insert batteries correctly with
“+” and “–” polarities as directed inside the battery compartment, wrong polarities insertion will
cause damage to the unit.
Battery Low Indicator: If the batteries are out of electric power, the low batteries icon goes solid.
It is suggested to replace the old batteries as soon as possible.
INSTALLATION
Before operation, please make sure that the VOLTAGE mentioned on the power supply is
same as the voltage of your local area.
Use the supplied mains adaptor to connect the device to a household mains socket.
When it is the first time running the device, the system will ask you to set Language and
Network configurations. You may setup the network connection immediately, or set it later.
Turn Selectionto select the desired option. Press Selectionto confirm.
Network configuration
1. Normal network configuration
Select “Yes” for the normal Wireless Network Configuration: Then select the required AP
by turning “Selection” and confirm it by pressing ”Selection.
Enter WEP or WPA code to connect the WiFi network by select the correct character
turning the ”Selectionbutton.
Press “>” button to select the next character.
In this condition, press < button you can turn left and delete the left characters at the
same time:
When the password is complete please press Selectionbutton to confirm.
Note: Below characters are available for the radio:
Numbers(from 0-9)
English letters(from A to Z and from a to z)
Other characters (@,!,”,#,$,%,&,*,’,+ and (,)
2. WPS PBC network configuration
Select “Yes WPS” when you would like set up with Wireless Network (WPS PBC) feature:
If you are using a router with WPS button, you may set up the network connection simple
via WPS function. Enter it and go to press the WPS button on your router within 120
seconds.
The connection between the router and the Radio will then be configured automatically
Select “No” when you not want to install the network at the moment.
3. No network configuration
Pls. select “No” when you don’t like to configure the network connection at the moment.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Soundmaster IR1450 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info