Bedienungsanleitung Soundmaster MCD5500 (Seite 6 von 11) (Englisch)

642508

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

MCD5500 / English Instruction Manual

FM-Stereo reception

 Press the “ Enter ” knob (3) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In particular

when stereo signals are weak, it is preferable to receive the program in Mono.

Hints for best reception:-

- FM/DAB : the receiver work with detachable DAB/FM wire antenna, make sure the antenna is plugged into the antenna

socket (30), totally unraveled and proper located for the best reception.

Aux-in connection

- Connect the unit to other device by connecting the Aux in jack (34) with a 3.5mm cable(not provided) and other end connect

to the external device such as Discman/MP3 player to perform the music playback or encoding function etc.

1. Press the Function button (10) to Phono/Aux position.

2. Adjust the Power ON-OFF/ Volume Control Knob (19) to desired volume level.

3. Start to play your external device.

Playing Compact Disc

 Getting start

- Press Function button (10) to select “ CD ” mode.

- Push the CD tray open (25) to open the CD tray.

- Place a CD with the printed side facing up and then close the CD tray.

- Focus search will performing and the LCD display (2) will show the total number of tracks & total playing time. Then, the unit

will start to automatically.

- Turn Volume knob (19) to the desired volume level.

 Play / Pause mode

1. To interrupt, press the “ Play/Pause ” button (16) once. Press again to resume normal playback.

 Stop mode

1. If “ Stop ” button (3) is pressed during play or pause mode, system will go to stop mode.

 Skip mode (skip up / skip down )

1. During play or pause mode, if “ skip up ” button (23) is pressed. It will go to next track and display the track no. and then

remain the play or pause mode.

2. During play or pause mode, if “ skip down ” button (13) is pressed. It will go to the previous track, original track no. is

display and remain the play or pause mode.

 For MP3 Disc

1. After focus search is performing, the total number of track and album will be shown on the LCD display (2). The unit will start

to plat directly.

2. Turn “ Folder/ Pre up /down ” knob on the remote control to select the folder number.

3. Press “ Skip Up or Skip Down ” button (23/13) to select the track number.

ID3/Display function (on remote control only)

Press the “ Info “ button repeatedly, the LCD display (2) show “ file ”during playback of MP3 file, the song file/album/song/artist

name is being displayed few seconds in sequence . Then will change back to current clock time.

Remark:-

- In that case of no name or not supportive languages had been assigned for the track, LCD display will blank (2) when press

the Info button.

- No Title/Album name can be recognized if the input format on the Disc is not supporting by the system.

- The system support only English and Arabic number for ID3 function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster MCD5500 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster MCD5500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info