Bedienungsanleitung Soundmaster PL585 (Seite 14 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch)

674278

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

PL585 / English Instruction Manual

SETTING THE CLOCK

1. Set unit in standby mode.

2. Press the “MEM / CLK-ADJ ” button (3) once, the display will start flashing. Press Skip/Tuning or button

(1) to select the appropriate area hour format(12hr/24hr)

3. Press “MEM / CLK-ADJ ” button (3) again, the first second digit of “0” is flashing. Press or button (1) to

set the correct hour. Press ”MEM / CLK-ADJ ” button (3) to store the correct hour.

4. The third fourth digit of “00” is flashing, press the or button (1) to set the correct minutes. Then press

“MEM / CLK-ADJ” button (3) to store the correct minute.

 The clock setting mode will automatically quit if no button is being pressed in a period of about 10

seconds after pressing the “ MEM / CLK-ADJ ” button.

 The set time will be re-set completely if dis-connecting the main power supply. You are recommended

to switch the system into standby mode for convenience usage.

LISTENING TO RADIO – FM

Manual tuning

1. Plug in the provided DAB/FM tuner antenna to the antenna socket (22) then switch on the unit by “On/Standby”

button (13), then turn the “FUNCTION” knob (5) to select “ FM ” mode.

2. Tune to the required station by or tuning button (1).

3. Turn the Volume knob (13) to the desired volume level.

Auto tuning

1. Set the unit to FM mode.

2. Press the “SCAN” button (10) once, unit will start to scan at tuning up direct until radio station received. Press

and hold the “SCAN” button (10) for a second, the unit will scan to tuning down direction. If the radio data

system (RDS) broadcasting signal received, the unit will set the actual time automatically.

3. Turn the Volume knob (13) to the desired volume level.

Radio data system (RDS)

This is the features to display the information which released from the radio broadcast and will showed on LCD

display step by step as below by pressing the “Info” button (on the remote control) continuously.

Radio text program type signal strength date/time frequency mono/stereo.

LISTENING TO RADIO – DAB

Digital audio broadcasting (DAB) radio

1. Set the unit to “DAB” mode by Function Knob (5).

2. Press and hold the “SCAN” (10) button for about 2 seconds, unit will start to full scan for searching stations.

Then press tuning or button (1) to select your desired DAB channel.

3. Press the “INFO” button continuously to check the below info released by DAB.

Group name frequency  transfer rate signal strength date/time program type  scrolling text

4. Turn the Volume knob (13) to the desired volume level.

Manual Tuning

1. Set the unit to “DAB” mode by Function Knob (5).

2. Press and hold the “Stop /ENTER” button“ (2),the LCD display will show “Manual tune“.

3. Press “Skip/Tuning or button“ (1) to select the DAB district band (5A – 13F) for your area, and then

press “Stop /ENTER” button“ (2) to confirm.

4. Press “Skip/Tuning or button“ (1) to select the DAB radio station

5. To exit the manual tuning, press the “Stop /ENTER” button“ (2) once.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster PL585 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster PL585

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info