Bedienungsanleitung Soundmaster RCD1350 (Seite 3 von 5) (Englisch)

562176

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

2. During play or pause mode, if Skip down button (11) is pressed, it will go back to the beginning of the track,

same track no. is display and continuous the play or pause mode.

3. After step 2, press skip down button (11) again, it will go to the previous track and continuous the play or pause

mode.

 For MP3 disc/file

1. Place the MP3-CD to CD compartment. After focus search is performing, the total number of track will be shown on

the LCD display (16).

2. Press Skip up or Skip down (11) button to select the track number.

3. When the desired track and album is being selected, press the “ Play/Pause

” button (13) to start playback.

Remark

- Press “ Folder up or down “ button (9/10) on main unit can select the MP3 folder directly.

- The number of folder will display on LCD (16) for 1-2 seconds selected and then it will resume to the number of the

track being playback

 Repeat/Random mode

Press the “ Rep/Ran “ button (3) during playback to select repeat and random function, a single track, single folder (MP3

only) or all the tracks can be played in difference mode as follow:-

For CD

(1) Repeat 1 (2) Repeat all track (3) Random (4) Off mode

Indicator

Play mode on LCD display

Repeat track REP

Repeat all REP

Random RANDOM

Off mode --------------

For MP3 disc/file

(1) Repeat 1 (2) Repeat 1 folder (3) Repeat all tracks (4) Random (5) Off mode

Indicator

Play mode on LCD display

Repeat single track REP

Repeat single folder REP & flashing

Repeat all tracks REP

Random RAN

Off mode -----------------

 Repeat play

You can listen the desired tracks or folder repeatedly by this function.

 Random play

You can listen all the tracks in a random order by this function

CD / MP3 disc programming

Up to 20 tacks can be programmed for disc play in any order. Before use, be sure to press the stop button.

1. Set in CD mode.

2. Press the Memory button (2), “ MEMORY “ & “ P01 ” will appear and flashing on LCD display (16).

3. Select a desired track by using the Skip up /Skip down buttons (11).

4. Press the Memory button (2) to enter the track into the memory.

5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.

6. When all the desired tracks have been programmed, press “ Play/Pause “ button (13) to play the disc in the

order you have programmed.

7. Press “ Stop

”

button (14) to terminate program play.

 Press “ Stop

”

button (13) at CD stop mode to cancel all programmed memory until the “ MEMORY “ indicator

disappear on LCD display (16).



For MP3 disc / file, press the “ Folder up “ button (10) to select the 1

track of next folder directly and hence to speed

up the song selection.

 The programming mode will automatically stop if no button is being pressed in a period of about 30 seconds after

pressing the Memory button (2).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster RCD1350 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster RCD1350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info