Bedienungsanleitung Soundmaster RCD5000 (Seite 9 von 38) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

562180

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

RCD5000 English Instruction Manual

Skip Mode

1. During play or pause mode, press the SKIP UP button to go to the next track.

2. During play or pause mode, press the SKIP DOWN button to go back to the previous track.

Programming

In case of Playing Audio CD/MP3 disc

The programming should be done during STOP mode

1. Press the MODE button, the LCD display will show P01.

2. Use the SKIP UP or SKIP DOWN button to select the desired track.

3. Press the MODE button again to store the selected track in the memory, the LCD display will show P02 and

flash continuously.

4. Repeat step 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the memory for CD disc

and 99 tracks in the memory for MP3 disc.

5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.

6. To stop playing, press the STOP/USB button.

7. To cancel the programming list, press the STOP/USB button and set the FUNCTION switch to OFF position.

BLUETOOTH STREAMING

1. Set the FUNCTION switch to BT/AUX position. The LCD display will show “bt” and the bluetooth icon will flash.

2. Turn on your Bluetooth of your Bluetooth device and search the boombox for connection. Your Bluetooth device

should find “RCD5000”.

3. If the connection is successful, the bluetooth icon on the LCD display will stop flashing.

4. Select and play the audio files though your Bluetooth device.

5. To stop this function, switch to other mode or shut down your Bluetooth of your Bluetooth device

BLUETOOTH STREAMING THROUGH NFC PAIRING

1. Set the FUNCTION switch to BT/AUX position. The LCD display will show “bt” and the bluetooth icon will flash.

2. Enable your NFC function of your Bluetooth device and place the device near the NFC sensor on the CD door

for 5 to 10 seconds.

3. If the connection is successful, your Bluetooth device will show that it is connected and the bluetooth icon on

the LCD display will stop flashing.

4. Select and play the audio files though your Bluetooth device.

5. To stop this function, switch to other mode or shut down your Bluetooth of your Bluetooth device

AUTO PAIRING

Once the unit paired with the Bluetooth device, it will automatically pair with that device next time when you turn on

the unit and that Bluetooth device.

SPECIFICATIONS

Frequency Range: FM 87.5 - 108 MHz

Power Supply: AC 100-240V ~ 50/60Hz

DC 12V (UM-2 x 8)

Specifications are subject to change without further notice.

IMPORTANT NOTICE

Automatic standby mode

To comply with the ErP2 directive, the unit automatically switches to standby after approx. 11 minutes without a signal.

(For instance in CD-Stop mode). To switch the unit on again, please follow the instructions mentioned in instruction

manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster RCD5000 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster RCD5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info