Bedienungsanleitung Soundmaster SCD 5401 (Seite 3 von 3) (Englisch)

562196

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

ENGLISH

ENG 2

AABC

Radio Operation

1. Switch the main power switch (19) to ON position

2. Slide the Function selector (2) to RADIO

3. Slide the Band selector (7) to a desired setting FM-ST/FM/AM

4. Rotate the Tuning control (9) to find the desired stations

5. When you finish listening, switch the main power switch (19) to OFF position

- FM operation:

Pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong.

- AM operation:

The item is provided with a built-in antenna. Direct the antenna by turning the whole set.

Cassette Operation

1. Switch the main power switch (19) to ON position

2. Slide the Function Selector (2) to TAPE

3. Press STOP/EJECT ■ (5) to open the cassette door

4. Press PLAY ◄ (5) to start playback

5. To interrupt playback press || (5). To resume, press the key again

6. By pressing |<< or >>| on the set, fast winding of the tape is possible in both directions

7. To Stop the tape, press STOP/EJECT ■ (5)

8. When you finish listening, switch the main power switch (19) to OFF position

Recording from the radio

1. Slide the Function Selector (2) to RADIO

2. Tune to the desired radio station

3. Insert a suitable cassette into the cassette deck

4. Press RECORD ● (5) to start recording

5. For brief interruptions, press PAUSE || (5). To resume press PAUSE again

6. To stop recording, press STOP/EJECT ■ (5)

Tape deck maintenance

To ensure quality recording and playback of the tape deck, clean parts A, B and C shown in the diagram

beside, after approx. 50 hours of operation. Use a soft cloth slightly moistened with alcohol or a special

head cleaning fluid to clean the deck.

CD Operation

1. Switch the main power switch (19) to ON position

2. Slide the Function Selector (2) to CD

3. Open the CD door (6) and insert a CD/-R/-RW with the printed side facing up and close the CD door

4. Press PLAY/PAUSE on the set to start playback

5. Press >>| (11) once briefly for the next track, or press repeatedly until the desired track number appears in the display

6. Press |<< (11) once briefly to return to the beginning of a current track

7. Press |<< (11) more than once briefly for a previous track

8. To pause playback press PLAY/PAUSE (13) again

9. To stop CD playback, press STOP (12)

10. When you finish listening, switch the main power switch (19) to OFF position

CD repeat

Press 1x REPEAT (14) to repeat the current track

Press 2x REPEAT (14) to repeat all tracks

Press 3x REPEAT (14) to cancel the function

Programming CD track numbers

1. In Stop mode press PROG (10), display shows „PROG“

2. Press |<< >>| (11) for select your desired track

3. When your chosen track number appears, press PROG (10) once to store the track. The display shows prog and prog briefly

followed by your selected track number

4. Repeat steps 2 and 3 to select and store all desired tracks in this way

5. To play your program, press PLAY/PAUSE (13) button

6. To erase a program, press twice STOP (12) button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster SCD 5401 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster SCD 5401

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info