AC OPERATION
Before operation, please make sure that the VOLTAGE mentioned on the unit is same as
the voltage of your local area. Unravel the AC power cord, insert one end into the AC
socket on the set, and the other end into a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands.
2. When planning not to use this unit for a long time, disconnect the power cable from
the wall outlet.
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in
order to avoid shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC cord set completely. Open the battery compartment door and insert 6
pieces UM-2 "C" size batteries into the battery compartment with battery polarity as shown
inside the battery compartment.
RADIO OPERATION
1. Set the FUNCTION switch to FM ST or FM position.
2. Rotate the TUNING control to tune to your desired radio station.
3. Adjust the sound level by rotating the VOLUME control.
4. To turn off the radio, set the FUNCTION switch to OFF position.
Note: When turn to a FM stereo broadcast the "FM ST." will be shown on the display.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations.
STEREO HEADPHONE JACK
For private listening, insert the plug of a stereo headphone into the phones jack and adjust
the VOLUME CONTROL accordingly. During the use of a headphone, the speakers are
automatically disconnected.
MP3/AUX IN CONNECTION
1. Set the FUNCTION switch to CD/USB/AUX or STORY/AUX position.
2. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the
line-out jack or phones jack on your MP3 player and the other side to the aux-in jack
on the unit.
3. Turn on your MP3 player and follow the playback instruction.
4. Adjust the VOLUME Control to the desired volume level.
5. To stop this function, simply turned off your MP3 player.
- EN 3 -
