Bedienungsanleitung Soundmaster UR170SW (Seite 10 von 39) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Schwedisch, Norwegisch)

674247

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

UK-1

FEATURES

AND

CONTROLS

FEATURES AND CONTROLS

1. SPEAKER

◄ / ►

BUTTON

3. MEMORY BUTTON

4. SELECT BUTTON

5. STANDBY/ON BUTTON

MODE BUTTON

BACKLIGHT BUTTON

8. SNOOZE BUTTON

9. INFO BUTTON

5 6 7 8 9 10 11 12

10. MENU BUTTON

11. SLEEP BUTTON

12. MUTE BUTTON

13. ALARM 1 BUTTON

14. ALARM 2 BUTTON

15. VOLUME BUTTON

16. LCD DISPLAY

17. AC CORD

18. HEADPHONE JACK

WIRE ANTENNA

LISTENING

YOUR

RADIO

Hints for better

reception

This radio carries a single DAB/FM lead wire antenna, to obtain the best performance, you should fully

extend the wire antenna and adjust the position as well as the direction until you find the best reception.

For ideal DAB reception, always maintain the lead wire antenna in a vertical position (holding it upward or

downward behind the unit) is highly recommended.

Getting

started

When the radio is connected to the DC power jack of AC/DC adapter for the first time, it will be in standby

mode. The display backlight will be on for a few seconds and the clock will be finally displayed. Press

the STANDBY/ON button once to turn the radio on, it will then automatically enter into the DAB mode and

perform auto scan function. During the scan the display will show “Scanning …” together with a slide bar

that indicates the progress of the scan and the amount of stations that have been found so far. (F. 1) (F. 2)

Once the scan has finished, the radio will select the first alphanumerically found station. You can now

press the ▲ or ▼ button to explore the found stations and then press the SELECT button to select your

station.

Note: If there is no stations found after auto scan, the radio will then enter into the Tune Select Menu, you

can now press the ▲ / ▼ buttons followed by pressing the SELECT button to select “Manual tune” or

“Autoscan” for stations.

Clock

setting

The clock will only set and be updated if you can receive DAB signals in your location. In order for the

clock to synchronise to the current local time, you must leave it one DAB station for a short period. Manual

clock setting is not required.

DAB auto

scan

The auto scan will search for the entire DAB Band III channels. After the scan has finished, the first

alphanumerically found station will be automatically selected.

1. To activate auto scan, first press the MENU button to enter into the Tune Select Menu and then press

the ▲ or ▼ button to select “Autoscan”, finally press the SELECT button to confirm, the display will

show “Scanning …” and a progressing slide bar.(F. 3)

2. All the stations that have been found will be stored automatically, to explore the stations that have

been found, press the ▲ or ▼ buttons and when you find a station that you would like to listen to,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster UR170SW Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info