Bedienungsanleitung Soundmaster UR170WE (Seite 13 von 39) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Schwedisch, Norwegisch)

674248

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

UK-4

4. Repeatedly press the ▲ or ▼ buttons followed by pressing the SELECT button to adjust and confirm

the wake-up mode settings - first set the DAB and FM Preset (1-10), then the Buzzer Tone (1 or 2),

finally the alarm Volume level (1-20). (F.10)

5. After the selection of the alarm volume level, the wake-up mode settings are completed and the

alarm function is now ready for you to activate.

6. Repeat the above procedures to set the other Alarm (1 or 2).

F10

Activating

the alarm

function

1. To activate the alarm function, repeatedly press the ALARM button (1 or 2), the associated alarm

wake-up mode will be displayed and changed in the below sequence on every press:

Alarm Off DAB Preset # FM Preset # Buzzer Tone #

2. When the display shows your desired alarm wake-up mode, release the button, the alarm function is

now activated and the associated alarm icon will be displayed.

3. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon in the display

will flash to indicate the alarm is triggered. To stop the alarm sooner, press the STANDBY/ON button.

4. To check the alarm status, press the ALARM button (1 or 2) once and the associated alarm status

will be displayed.

Note:

If you have activated the alarm function and the wake-up mode is DAB or FM, make sure that the

alarm volume level is set at a sufficient level for you to hear.

Automatic

Alarm

Repeat

The alarm will automatically repeat each day at the selected time as long as the alarm icon is displayed.

To cancel this function, repeatedly press the ALARM button (1 or 2) button until the display shows “Alarm

off”.

SNOOZE

FUNCTION

When the alarm has triggered, press the SNOOZE button will temporary switch off the alarm for 5

minutes, the display will show “ Zz “to indicate snooze on. This is repeatable in the one hour alarm

duration.

Note:

The alarm comes first will have the priority and it would continue for a one hour duration, the

snooze will just switch off this alarm temporary during this duration, so if the second alarm comes in this

period, it will not function. But if the first alarm is switched off before the second alarm arrives, then the

second alarm will be activated.

SLEEP

FUNCTION

This function allows you to program the radio to switch off itself after a set period of time.

1. To activate the sleep function, repeatedly press the SLEEP button, the display will show “Sleep

Timer” and the time will change in the below sequence on every press:

Off

2. When your desired sleep time appears in the display, release the button and the sleep function will

be activated in two seconds. The display will show “ # ” where “ 1” is to represent “10 minutes”

sleep time and so on.

3. When the sleep time counts to zero, the unit will go off. To put the sleep function off during sleep

timer on, repeatedly press the SLEEP button until the display shows “Sleep Timer off”.

4. To check the sleep timer status, repeatedly press the INFO button until you see the sleep timer

information appears in the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster UR170WE Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info