SETTING THE ALARM 2 (RADIO)
Normal Time → AL 2 Hour → AL 2 Minute → AL 2 weekday → AL 2 beeper
→ AL 2 radio → AL 2 final radio volume → Normal Time.
1. In standby mode, tap the AL1 (or AL2) button to show the preset alarm time.
2. Press and hold the AL1 (or AL2) button again for about 2 seconds until the
Hour Indicator on the LED DISPLAY flashes. Press the (2) or (3) button to
obtain the desired Alarm Hour.
3. Tap the AL1 (or AL2) button again to advance to the Minute Indicator. Press
the (2) or (3) button to obtain the desired Alarm Minutes.
4. Tap the AL1 (or AL2) button again to advance to the Weekday Indicator. Press
the (2) or (3) button to select the desired Alarm Weekday mode as follows :
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week (you need to further select 1 for Monday, 2 for Tuesday
and so on)
5. Tap the AL1 (or AL2) button again to advance to select the Alarm source
between Beeper or Radio.
Notes:
- If you want to choose radio as the alarm source, you need to set the radio to
your desired radio station in radio mode first.
- After selecting the Radio as the alarm source during alarm setting, you need
to select FM radio and the preset alarm volume level (up to maximum level
15). When the radio is turned ‘On’ at the preset alarm time, the radio will
begin to sound at a low volume and gradually increases to the preset volume
level.
Note: it is not possible to adjust the volume level during the radio alarm. If
volume adjustment is needed, you must turn ‘Off’ the radio first, and then turn
it ‘On’ again using the POWER ON/STANDBY button. The alarm will also be
stopped immediately.
6. Press the AL1 (or AL2) button to finish setting and exit to normal time display.
7. To disable ALARM 1 (or 2) from automatically sounding on the upcoming days,
press and hold the AL1 (or AL2) button for about 2 seconds, the
corresponding AL1 (or AL2) INDICATOR will go off.
8. To resume ALARM 1 (or 2) from automatically sounding on the upcoming
days, press and hold the AL1 (or AL2) button for about 2 seconds, the
corresponding AL1 (or AL2) INDICATOR will turn on and the alarm(s) will
sound the following day at the set time.
