Bedienungsanleitung Soundmaster UR2016 (Seite 13 von 86) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch)

733778

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

UR2016 / English Instruction Manual

ACTIVATE LED LAMP

Press the “Light” button once, the lamp will lightning. Press the button again to switch off the

lamp. To save energy, the lamp will automatically switch off after 120 minutes.

SETUP

Press in standby mode the “Menu” button to enter into the setup mode and the “ “ or “ ”

button to select the following settings. Press “Enter” to confirm the selection. To leave the setup

menu, press the “Menu” button or wait for about 10 seconds.

1. Set EQ (Equalizer)

The unit has 6 preset equalizer settings and one custom setting.

1. When you have entered the EQ setting, press the “ “ or “ ” button to select one of

the preset EQ (FLAT, ROCK, CLASSIC, JAZZ, POP, BASS) or the custom setting

(CUSTOM) and “Enter” to confirm the selection.

2. If you have chosen the “CUSTOM” setting, now you can select the setting for “BASS” or

“TREBLE” with the “ “ or “ ” button and press “Enter” to confirm. To adjust the

setting, press the “ “ or “ ” button and confirm with “Enter”.

2. Set the clock and date

1. When “TIME SET” is shown in the display, press the “Enter” button to enter the clock,

date, update and format settings.

2. Press the “ “ or “ ” button to select “CLOCK”, “SET DATE”, “UPDATE” or “12/24H”

and press “Enter” to confirm.

CLOCK: Adjust the flashing digits (hour, minute) with the “ “ or “ ” button and

confirm each with the “Enter” button.

SET DATE: Adjust the flashing digits (day, month, year) with the “ “ or “ ” button

and confirm each with the “Enter” button.

UPDATE: If “F RADIO” is shown in the display, the device will automatically update the

clock from DAB or FM mode (When RDS is available!). If “NOUPDATE” is shown, the

device will running without automatically update. Select with the “ “ or “ ” button and

confirm with the “Enter” button.

12/24H: Set the clock display in “12” or “24” hour format. Select with the “ “ or “ ”

button the format and confirm with the “Enter” button.

3. Set SDA timer

SDA means “Special Date Alert”. It´s provide to remember favorite days. There are 10 days

for input (SDA 0-9)

1. Select “SET SDA” with “ “ or “ ” and press “Enter” to confirm”.

2. Select the SDA timer 0-9 and press “Enter” to confirm. The display show “31.12.2018”

and the first two digits are flashing.

3. Press the “ “ or “ ” button to adjust each input (Date/month/year) and confirm with

the “Enter” button.

4. After finishing the display will show “EQ” again.

5. To adjust another SDA timer please select again “SET SDA” follow the steps 1-3.

6. SDA activate time is at 8.00AM for 10 minutes.

4. Set Alarm

You can set 2 alarm times on this device.

1. Select “ALARM 1” or “ALARM 2” with the “ “ or “ ” button and confirm the selection

with the “Enter”.

2. Adjust the hour with the “ “ or “ ” button and confirm with “Enter”.

3. Adjust the minutes with the “ “ or “ ” button and confirm again with “Enter”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster UR2016 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info