UR580 / English Instruction Manual
2
BACKUP BATTERY
One CR2032 lithium battery (not included) is needed to keep all settings (alarm, time, radio
settings), if the power is interrupted.
1. Open the battery compartment at the backside of the unit.
2. Insert the CR2032 battery with the “+” side facing up into the battery compartment.
3. Close the battery compartment.
Note:
➢ The display will turn off, if the power is interrupted.
➢ Without power, the unit has no radio and alarm function.
VIBRATION PAD
GET STARTED THE VIBRATION PAD
1. Open the battery compartment at the backside of the vibration pad.
2. Insert 3 batteries of type LR03 (“AAA” size) 1.5V into the battery compartment. Please
ensure that the polarity is correct (see indicated in the battery compartment).
3. Close the battery compartment.
4. During the LED indicator is flashing at the vibration pad, press in off mode the “PAIR” button
on the radio. Now the vibration pad is paired with the unit.
Note: When the battery gets low, the LED indicator of the vibration pad is flashing.
So that the vibration pad stays close to the pillow, put the vibration pad in the cover of your
pillow!
BASIC OPERATIONS
RADIO ON / OFF
Press the “RADIO ON” button to turn on the unit in radio mode.
Press the “RADIO OFF” button to turn off the unit.
ADJUSTING VOLUME
In on mode, press the “VOL / RADIO” button. During the display show “LXX” (XX = the level of
the volume), press the “ ” or “ ” button to decrease or increase the volume (L01 = min, L15 =
max). It is not possible to mute the radio.
BRIGHTNESS ADJUSTMENT
Rotate the “DISPLAY DIMMER” knob on the right side of the unit to adjust the brightness of the
display.
TIME SETTING
