673312

Soundmaster URD-770 Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
INSTRUCTION MANUAL
Please read and follow these instructions before using your unit
CAUTIONS FOR SAFETY
CONDENSATION
Do not take the unit apart. The laser beam used in the unit could harm your eyes.
Do not insert pins or other objects inside the unit. This unit is equipped with a
safety device which automatically turns the laser beam off when the disc
compartment is opened. If a pin or other metal object should get inside the unit,
however, this safety device may be deactivated.
Do not drop the unit or subject it to strong shocks. Doing so could result in
damage.
Do not place the unit in the following locations:
Locations where the temperature is high. The unit's cabinet may warp or the
unit may otherwise be damaged if it is placed in direct sunlight, near heaters
(where the temperature is 140 F/60 C or greater) or in cars with the windows
closed. (In the summer, the temperature may get as high as 212 F/110 C or
more.)
Use the unit within a temperature range of 41 F/5 C to 95 F/35 C.
In humid or dusty locations.
In locations exposed to heavy vibrations.
On unstable or tilted surfaces.
If cold water is poured into a glass, water droplets form on the outside of the glass.
This is called condensation. Condensation may occur on internal operating parts of
the laser pickup.
Condensation occurs:
When the unit is brought from the outdoors into a warm room, or if it is in a cold
room which is heated quickly.
In the summer, if the unit is moved suddenly from an air-conditioned room or car
to a hot or humid location.
Should condensation occur:
The unit may not operate properly if condensation occurs. Wait for 1 to 2 hours (to
allow the internal parts to adjust to the surrounding temperature) before using the
unit.
Ê
Ë
Ê
Ë
Ì
Í
Î
Ê
Ë
LL
LL
LL L L
1
ALARM CLOCK RADIO CD PLAYER
URD-770
soundmaster
R
LOCATION OF CONTROLS
1. CD DOOR
2. CD DOOR OPEN BUTTON
3. ALARM/SLEEP OFF BUTTON
4. PM INDICATOR (OPTIONAL)
5. ALARM 1 INDICATOR
6. ALARM 2 INDICATOR
7. CLOCK DISPLAY
8. SLEEP INDICATOR
9. FM STEREO INDICATOR
10. CD TRACK DISPLAY
11. PROGRAM INDICATOR
12. PLAY/PAUSE INDICATOR
13. CD SKIP/SEARCH UP BUTTON
14. CD SKIP/SEARCH DOWN
BUTTON
15. SNOOZE BUTTON
16. ALARM SELECT SWITCH
17. SLEEP BUTTON
18. TIME BUTTON
19. ALARM BUTTON
20. REVERSE BUTTON
21. FORWARD BUTTON
22. CD REPEAT BUTTON
23. CD PROGRAM BUTTON
24. CD STOP BUTTON
25. CD REPEAT INDICATOR
26. FUNCTION SWITCH
(BUZZER/AUTO/OFF/ON)
27. CD PLAY/PAUSE BUTTON
28. SPEAKERS
29. PHONES JACK
30. CD/RADIO SWITCH
31. VOLUME CONTROL
32. BAND SWITCH
33. TUNING CONTROL
34. FM AERIAL
35. DIMMER SWITCH
36. ALARM LOUDNESS SWITCH
37. AC POWER CORD
38. AC VOLTAGE SELECTOR
(OPTIONAL)
39. BATTERY COMPARTMENT
(FOR 9V BACKUP BATTERY)
POWER CONNECTION
1. Plug the AC Power Cord into an AC household outlet.
2. If you want battery back up, connect one 9 Volt battery (not included) to the
battery terminals of the Battery compartment.
3. This battery will maintain time and memory function during a power cut, but not
display it.
4. Normal display and function will resume when power is restored, replace the
battery periodically.
This is an optional feature, no battery is required for normal operation.
When AC power is interrupted, time and alarm settings will be lost (unless 9 volt
optional battery was installed) after power is restored . The digital display will blink
to show your power was interrupted. You must reset time and alarm.
To keep alarm time and time of day settings in memory during a brief power failure
or if the power cord is accidentally unplugged, install a 9V battery into the Battery
Compartment at rear of unit.
NOTE: Please make sure that AC Voltage Selector is switched to your local
voltage (optional).
NOTE:
POWER FAILURE
BATTERY BACK UP
Dripping Warning: The product shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be placed on the
product.
Ventilation Warning: The normal ventilation of the product shall not be
impeded for intended use.
12
3
4
5
7
8
911
12
6
10
14
13
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
28
33
32
3734 35 36
38
39
32
RADIO OPERATION
NOTE:
NOTE:
COMPACT DISC OPERATION
1. Slide the CD/RADIO switch to the RADIO position.
2. Slide the Band switch to a specified band.
3. Rotate the Tuning control to the desired station.
4. Adjust the Volume control to a comfortable listening sound level.
5. For AM(MW) band, better reception can be obtained by rotating the set. For
FM band, the FM Aerial Wire (thin black wire) which serves as FM aerial,
must be stretched to its full length.
When you are receiving FM Stereo program, the FM Stereo indicator
will be steady on.
6.
If a particular FM (STEREO) station is weak, or you hear too much
background noise, try moving the position of the band selector switch
to the FM (MONO) position. This can often result in a much clearer
reception.
The radio can be switched off by setting FUNCTION switch to OFF position.
i
i
i
i
Always protect a disc against scratches, soil and dust etc. It is
recommended that during non-use periods the discs should be
retained in the original case. If a disc is treated with
reasonable care, the only maintenance likely to be needed to
retain the excellent sound reproduction is wiped off with a cloth
as indicated.
To handle a disc use only one of the two manners illustrated.
(Do not touch the rainbow - colored side)
To wipe a disc, use only a soft cloth. Do not use benzene or
thinner which will damage the disc. The disc should always be
wiped in a straight line from the center to the edge. It should
never be wiped in a circular motion.
Never place the disc on other equipment or near any heat
source. Avoid positions where the disc would be subjected to
direct sunlight for long periods.
LISTENING TO A COMPACT DISC
1. Set the CD/RADIO switch to CD position.
2. Press the Open button to open the CD Door, place a CD with the printed
side up into the CD compartment
3. Press the corner of the CD door to close the lid, the disc will rotate and the
LED Display will show the disc's total number of tracks.
4. Press the CD Play/Pause Button:
Press once the play starts from the first track.
n
n Press this button in play mode and the playback will be paused. To
resume playback from the same point, press the button again.
5. Press the CD Skip/Search buttons during play to skip to the desired track.
Press the CD Skip/Search up button to skip to the next track on the disc.
Press the CD Skip/Search Down button to skip to the beginning of the track
currently playing.
Press and hold the CD Skip/Search buttons during play to scan the disc
at high speed. When the desired section of the disc is found, release the
button, normal play will resume.
6. Press CD Stop
n
button to stop CD playing.
PROGRAMME PLAY
NOTE:
REPEAT PLAY OPERATION
SINGLE TRACK REPEAT
ALL TRACKS REPEAT
Up to 20 tracks can be programmed for disc play in the order you like or the
same track (song) can be repeated up to 20 times.
Programming can only be done during stop mode.
1. Press the PROGRAM button in stop mode.
2. The display will show"0"flashing and the PROGRAM indicator will flash.
3. Press the SKIP/SEARCH buttons until the desired track shows in the display.
The PROGRAM indicator keeps flashing.
4. Press the PROGRAM button. The first track is now stored into memory, and
" 0 " flashes in the display again waiting for your next selection.
5. Repeat steps 3 and 4 until all the desired tracks are programmed.
6. When you have finished programming, press the PLAY/PAUSE button.
7. The display will show the track number being played, and the PROGRAM
indicator will keep flashing during program play.
8. All songs will be played in the order you programmed.
9. If you want to hear the next song while playing, press the SKIP/SEARCH
buttons.
10. When all the songs have finished, the set will stop. The PROGRAM indicator
will turn off. To play the programmed tracks again, press the PROGRAM
button, then press the PLAY/PAUSE button.
11. To erase the programme, press the PROGRAM button and then press STOP
button.
To repeat the SAME track over and over again, do the following.
1. Press the Skip/Search Button during playback to select the track you want to
repeat.
2. Press the Repeat Button. The Repeat Lamp will flash.
3. The track you selected will play over and over, till you press Stop Button.
4. To stop the repeat function, press Repeat Button twice.
To repeat ALL TRACKS on a disc and then play them again and again, do the
following.
1. Press Repeat Button twice during playback. The Repeat Lamp will be
constantly on.
2. All the tracks on the CD will play in order and then start all over again. To stop the
repeat function, press Repeat Button once.
54
TO SET CLOCK TIME 24 HOURS
NOTE:
NOTE:
TO SET ALARM TIME
WAKE TO RADIO
WAKE TO CD MUSIC
WAKE TO ALARM
1. Press and hold Time set button.
2. While holding down Time set button ,press FORWARD and REVERSE
buttons until correct time is displayed.
3. Release these buttons when the correct time is reached.
When setting the time, be careful not to touch Snooze or Sleep button.
Touching this button will change the display time.
The PM Indicator (Optional) will be on for a 12-hour version when you
have reached 12 o'clock and enter PM time setting.
This set has dual alarms, you may set Alarm 1, to wake you at a certain time or
Alarm 2 to wake you at a different time or Alarm 1+2 to wake you at both these
different time you set.
To set Alarm 1, slide the Alarm selector to position 1.
To set Alarm 2, slide the Alarm selector to position 2.
To check alarm time, press Alarm Set button. The display will show
alarm time.
To wake at Alarm 1 time, slide Alarm selector to position 1; To wake at
Alarm 2 time, slide Alarm selector to position 2; To wake at both time,
slide to Alarm 1+2.
When setting time, be careful not to touch Snooze and/or Sleep button.
Touching these buttons will change the time.
1. Open CD Door by pressing CD Open button and place a CD into the CD
compartment.
2. Slide the CD/RADIO switch to CD.
3. Set the alarm time or check if the pre-set alarm time is correct by pressing
the Alarm set button.
4. Slide the FUNCTION switch to AUTO.
The CD will then start playing from the first track at the pre-set alarm time.
1. Set the alarm time or check if the pre-set alarm time is correct by pressing
the Alarm set button.
2. Slide the FUNCTION switch to BUZZER position.
3. Buzzer will sound at the pre-set alarm time.
Select High/Mid/Low ALARM Volume position.
5. Slide the FUNCTION switch to OFF to silence the alarm.
NOTE:
NOTE:
n
1. Turn radio on (slide Band switch to MW or FM or FM ST. position) and adjust
the Tuning and Volume control.
2. Set the alarm time or check if the pre-set alarm time is correct by pressing
the Alarm set button.
3. Slide the FUNCTION switch to AUTO.
The radio will start playing automatically at the set alarm time.
4.
n
SNOOZE FUNCTION
GOING TO SLEEP WITH MUSIC, CD OR RADIO
NOTE:
To sleep an extra 7 minutes when the Radio/Buzzer/CD comes on, lightly touch
the Snooze button, the radio or alarm or CD will stop for 7 minutes and come on
again.
The display for clock shows the minutes and seconds of the real-time clock.
Let's say, the time is 12:36; press SNOOZE button; the display shows 6:00, with
"6" as the minutes and "00" as the seconds of the clock. When a period of seven
minutes passes, the display says "3:00" (the time now is 12:43);
Radio/Buzzer/CD comes on again to wake you up.
Pressing the SLEEP button will play your Radio/CD music for the amount of
time you specify and then turn off automatically.
1. Press and hold the sleep button. The display will show 59 minutes.
2. While holding the sleep button, press the FORWARD or REVERSE button to
increase or decrease the time to the required amount.
3. The RADIO/CD will play for the time you set and shut itself off automatically.
To avoid influence on alarm pre-set time, make sure FUNCTION
switch is set to AUTO or BUZZER for alarm to come on in time.
MAINTENANCEAND CARE
CLEANING THE CABINET
CLEANING THE LENS
Dust or dry particles
Finger prints
1. Electronic products should never be subjected to extreme temperatures nor
high humidity to ensure good performance and a long life-time. The clock radio
should not be placed in bathing areas, or around stoves and radiators, etc.
Always leave sufficient space around the unit for ventilation.
2. If necessary, only clean the cabinet of the unit with a soft dampened piece of
cloth (be sure the AC power cord is unplugged from the outlet). Never use a
polish or a strong detergent for cleaning since this can damage the finish of the
cabinet.
Before cleaning ensure the unit is unplugged from the mains. Wipe with a soft cloth.
If the cabinet is very dirty, dampen the cloth with a weak solution of neutral
detergent and water, and then wipe clean.
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not
work. Open the disc cover and clean the lens as follows:
Using a camera lens brush/blower, blow on the lens couple times, then wipe it
lightly with the brush to remove dust. Then, blow on the lens once more.
If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab
starting in the middle and working to the outside edge.
76
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Soundmaster URD-770 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info