Bedienungsanleitung Soundmaster URD-770 (Seite 3 von 4) (Englisch)

673312

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

RADIO OPERATION

NOTE:

COMPACT DISC OPERATION

1. Slide the CD/RADIO switch to the RADIO position.

2. Slide the Band switch to a specified band.

3. Rotate the Tuning control to the desired station.

4. Adjust the Volume control to a comfortable listening sound level.

5. For AM(MW) band, better reception can be obtained by rotating the set. For

FM band, the FM Aerial Wire (thin black wire) which serves as FM aerial,

must be stretched to its full length.

When you are receiving FM Stereo program, the FM Stereo indicator

will be steady on.

If a particular FM (STEREO) station is weak, or you hear too much

background noise, try moving the position of the band selector switch

to the FM (MONO) position. This can often result in a much clearer

reception.

The radio can be switched off by setting FUNCTION switch to OFF position.

Always protect a disc against scratches, soil and dust etc. It is

recommended that during non-use periods the discs should be

retained in the original case. If a disc is treated with

reasonable care, the only maintenance likely to be needed to

retain the excellent sound reproduction is wiped off with a cloth

as indicated.

To handle a disc use only one of the two manners illustrated.

(Do not touch the rainbow - colored side)

To wipe a disc, use only a soft cloth. Do not use benzene or

thinner which will damage the disc. The disc should always be

wiped in a straight line from the center to the edge. It should

never be wiped in a circular motion.

Never place the disc on other equipment or near any heat

source. Avoid positions where the disc would be subjected to

direct sunlight for long periods.

LISTENING TO A COMPACT DISC

1. Set the CD/RADIO switch to CD position.

2. Press the Open button to open the CD Door, place a CD with the printed

side up into the CD compartment

3. Press the corner of the CD door to close the lid, the disc will rotate and the

LED Display will show the disc's total number of tracks.

4. Press the CD Play/Pause Button:

Press once the play starts from the first track.

n Press this button in play mode and the playback will be paused. To

resume playback from the same point, press the button again.

5. Press the CD Skip/Search buttons during play to skip to the desired track.

Press the CD Skip/Search up button to skip to the next track on the disc.

Press the CD Skip/Search Down button to skip to the beginning of the track

currently playing.

Press and hold the CD Skip/Search buttons during play to scan the disc

at high speed. When the desired section of the disc is found, release the

button, normal play will resume.

6. Press CD Stop

button to stop CD playing.

PROGRAMME PLAY

NOTE:

REPEAT PLAY OPERATION

SINGLE TRACK REPEAT

ALL TRACKS REPEAT

Up to 20 tracks can be programmed for disc play in the order you like or the

same track (song) can be repeated up to 20 times.

Programming can only be done during stop mode.

1. Press the PROGRAM button in stop mode.

2. The display will show"0"flashing and the PROGRAM indicator will flash.

3. Press the SKIP/SEARCH buttons until the desired track shows in the display.

The PROGRAM indicator keeps flashing.

4. Press the PROGRAM button. The first track is now stored into memory, and

" 0 " flashes in the display again waiting for your next selection.

5. Repeat steps 3 and 4 until all the desired tracks are programmed.

6. When you have finished programming, press the PLAY/PAUSE button.

7. The display will show the track number being played, and the PROGRAM

indicator will keep flashing during program play.

8. All songs will be played in the order you programmed.

9. If you want to hear the next song while playing, press the SKIP/SEARCH

buttons.

10. When all the songs have finished, the set will stop. The PROGRAM indicator

will turn off. To play the programmed tracks again, press the PROGRAM

button, then press the PLAY/PAUSE button.

11. To erase the programme, press the PROGRAM button and then press STOP

button.

To repeat the SAME track over and over again, do the following.

1. Press the Skip/Search Button during playback to select the track you want to

repeat.

2. Press the Repeat Button. The Repeat Lamp will flash.

3. The track you selected will play over and over, till you press Stop Button.

4. To stop the repeat function, press Repeat Button twice.

To repeat ALL TRACKS on a disc and then play them again and again, do the

following.

1. Press Repeat Button twice during playback. The Repeat Lamp will be

constantly on.

2. All the tracks on the CD will play in order and then start all over again. To stop the

repeat function, press Repeat Button once.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster URD-770 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info