Bedienungsanleitung Soundmaster URD480WE (Seite 4 von 9) (Englisch)

733841

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

URD480 / English Instruction Manual

INSTALLATION

 Use only the supplied AC/DC-adapter. Do not connect the unit before checking the main

voltage and before all other connections have been made.

 The unit has a built-in FM rod antenna (1). Extended the rod antenna totally and rotate the

proper angle for the best reception.

1. Insert the plug from the AC/DC-adapter (20) to the DC jack (17) of the main unit. Then

connect the AC/DC-adapter to an AC outlet.

2. When you connect the unit at first time the display (15) will show “0:00” and start flashing.

3. Turn the unit on by pressing the “I / “ button (2).

Note:

 The preset time will be reset completely if power source is interrupted.

 The clock time will adjust automatically after receiving a FM RDS or DAB signal.

VOLUME CONTROL

Press the “VOLUME - / +” button (3) to decrease or increase the volume.

DAB MODE

To have the best possible reception pull out the rod antenna complete.

1. Turn the unit on by pressing the “I / “ button (2).

2. When you turn it on at first time it is preset in DAB radio mode and the unit will start

automatically a complete full scan. The display will show “Searching”.

3. After the auto-scan has been completed the unit will jump to the first radio station.

4. Press the “ / ” buttons (10) to select a desired DAB radio station.

5. By continuously pressing the “INFO / ” button (11) you can check the below info released of

the DAB station:

Date/Time  Program type  Scrolling text  Group name  Frequency  Transfer rate 

Signal strength

6. Press the “Volume - / +” buttons to decrease or increase the volume.

7. If the unit is not in DAB mode when turning on press the “FUNCTION” button (8) to turn to

the DAB mode. Press the “SCAN” button (9) if you wish to start a full scan again and search

the available DAB radio stations.

Preset stations

You can store up to 20 DAB radio stations in the memory.

1. Turn the unit on by pressing the “I / “ button (2) and change to DAB mode by continuously

pressing the “FUNCTION” button.

2. Search the desired radio station by pressing the “ / ” buttons (10).

3. Press and hold the “+10 / PRE ” button (12) until display will show “<………P01>. The

preset station number will flash in the display.

4. Press the “ / ” buttons (10) to select the desired station memory number for storage.

5. Press the “ENTER / PLAY MODE” button (13) to confirm the preset memory station. The

display will show “Preset * restored” (* means the radio station number!).

6. Repeat step 2 to 5 to store other stations.

 You can overwrite a preset station by storing another desired station in its place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster URD480WE Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster URD480WE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info