Bedienungsanleitung Sparky BP 860CE (Seite 7 von 114) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

604123

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

Original instructions

ing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be

caught in moving parts.

g) If devices are provided for the connec-

tion of dust extraction and collection fa-

cilities, ensure these are connected and

properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. The

correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjust-

ments, changing accessories, or stor-

ing power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other condi-

tion that may affect the power tool’s op-

eration. If damaged, have the power tool

repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind

and are easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to be

performed. Use of the power tool for op-

erations different from those intended could

result in a hazardous situation.

5) Service

a) Have your power tool serviced by a

-

tical replacement parts. This will ensure

that the safety of the power tool is main-

tained.

Rotary hammer

safety warnings

Wear ear protectors with rotary ham-

mers. Exposure to noise can cause hearing

loss.

▪ Use the auxiliary handle supplied with the

machine. Loss of control can cause personal

injury.

During operation provide eye protec-

-

ing particles. Wear goggles.

Take protective measures against inha-

lation of dust. Some materials can contain

toxic ingredients. Wear a dust mask and work

with dust/chip extraction when connectable.

▪ Hold the power tool by insulated gripping

surfaces only, when performing an op-

eration where the cutting accessory may

contact hidden wiring or its own cord. Cut-

ting accessory contacting a “live” wire may

make exposed metal parts of the power tool

“live” and could give the operator an electric

shock.

▪ Do not process materials containing asbes-

tos. Asbestos is considered carcinogenic.

WARNING: Before connecting a tool

to a power source ensure that the voltage

supply is the same as that specied on the

nameplate of the tool.

▪ A power source with a voltage greater than

that specied for the tool can result in serious

injury to the user, as well as damage to the

tool.

▪ If in doubt, do not plug in the tool.

▪ Using a power source with a voltage less than

the nameplate rating is harmful to the motor.

▪ Fully unwind cable drum extensions to avoid

potential overheating.

▪ When an extension cable is required, you

must ensure that it has the right ampere rating

for your power tool and it is in safe electrical

condition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sparky BP 860CE Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info