Bedienungsanleitung Sparta C-grid Fit M7Tb - 2021 (Seite 191 von 230) (Holländisch)

779121

191

Zoom out

Zoom in

Vorherige Seite

1/230

Nächste Seite

English – 2

Technical data

Charger Standard charger

(36–4/230) Compact charger

(36–2/100-230) Fast charger

(36–6/230)

Product code BCS220 BCS230 BCS250

Rated voltage V~ 207to264 90to264 207to264

Frequency Hz 47to63 47to63 47to63

Battery charging voltage V= 36 36 36

Charging current (max.) A 4 2 6A)

Charging time

– PowerPack 300, approx. hrs 2.5 5 2

– PowerPack 400, approx. hrs 3.5 6.5 2.5

– PowerPack 500, approx. hrs 4.5 7.5 3

Operating temperature °C 0to+40 0to+40 0to+40

Storage temperature °C +10to+40 +10to+40 +10to+40

Weight, approx. kg 0.8 0.6 1.0

Protection rating IP40 IP40 IP40

A) The charging current is limited to 4A for the PowerPack 300 and for Classic+ Line batteries.

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Operation

Start-up

Connecting the charger to the mains (see figure A)

uPay attention to the mains voltage. The voltage of the

power source must match the voltage specified on the

rating plate of the charger. Chargers marked 230 V can

also be operated at 220 V.

Plug the device connector (3) of the power cable into the

device socket (2) on the charger.

Connect the power cable (country-specific) to the mains.

Charging the removed battery (see figure B)

Switch the battery off and remove it from its holder on the

eBike. When doing so, read and observe the operating in-

structions of the battery.

uEnsure the battery is placed on clean surfaces only.

Avoid getting dirt, e.g. sand or soil, in the charging socket

and contacts in particular.

Plug the charging connector (5) of the charger into the

socket (6) on the battery.

Charging the battery on the bike (see figures C andD)

Switch the battery off. Clean the cover of the charging

socket (7). Avoid getting dirt, e.g. sand or soil, in the char-

ging socket and contacts in particular. Lift the cover of the

charging socket (7) and plug the charging connector (5) into

the charging socket (6).

uThere is a risk of fire due to the charger heating up

during charging. Ensure the battery on the bike is

completely dry and placed on a fireproof surface be-

fore charging. If this is not possible, remove the battery

from the holder and charge it in a more suitable location.

When doing so, read and observe the operating instruc-

tions of the battery.

Charging process for two batteries

If two batteries are fitted to an eBike, both batteries can be

charged using the uncovered connection. To begin with,

both batteries are charged one after the other until they

reach approx.80–90% capacity, then they are both fully

charged at the same time (the LEDs flash on both batteries).

When the bike is in operation, power is drawn from both bat-

teries on an alternating basis.

If you take the batteries out of the holders, you can charge

each one individually.

Charging process

The charging process begins as soon as the charger is con-

nected to the battery or charging socket on the bike and to

the mains.

Note: The charging process is only possible when the tem-

perature of the eBike battery is within the permitted char-

ging temperature range.

Note: The drive unit is deactivated during the charging pro-

cess.

The battery can be charged with and without the on-board

computer. When charging without the on-board computer,

the charging procedure can be observed on the battery

charge indicator.

When the on-board computer is connected, a charging noti-

fication appears on the display.

The state of charge is displayed by the battery charge indic-

ator (9) on the battery and by the bars on the on-board com-

puter.

The LEDs on the battery charge indicator (9) flash during the

charging process. Each solid illuminated LED represents ap-

0 275 007 XCX | (13.03.2020) Bosch eBike Systems

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sparta C-grid Fit M7Tb - 2021 Seite 191

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sparta C-grid Fit M7Tb - 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info