Bedienungsanleitung Spartherm Ambiente (Seite 51 von 57) (Englisch)

695779

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

8.2 GENERAL INFORMATION

This product has been manufactured in compliance with current standards

of quality control. The materials used have been carefully selected and -

like our entire production process - are subject to on-going quality control.

Specialist knowledge is required when assembling and installing the prod-

uct. The product must, therefore, only be installed and commissioned into

service by specialist technical staff, in compliance with current statutory

provisions.

8.3 WARRANTY PERIOD

The standard warranty terms only apply within Germany and the European

Union. The warranty period and scope of the warranty are ensured within the

framework of these conditions outside the statutory warranty which remains

unaffected. Spartherm Feuerungstechnik GmbH offers a 5-year guarantee

in respect of:

• Main carcass of fireplace inserts

• Main carcass of fireplace stoves

• Main carcass of fireplace cassettes

• Main carcass of fireplace doors

Spartherm Feuerungstechnik GmbH offers a 24-month guarantee in respect

of the sliding door mechanism, operating components such as handles, set-

ting levers, shock absorbers, electrical and electronic components such as

fans, rotational speed controllers, the manufacturer's original spare parts,

all items purchased as additional extras and all safety appliances.

Spartherm Feuerungstechnik GmbH offers a 6-month warranty on wear parts

in the fire area, e.g. chamotte, vermiculite, fire grates and glass ceramic.

8.4 WARRANTY REQUIREMENTS

The warranty period shall begin on the date on which the product is deliv-

ered to the dealer / distributor. Invoices or delivery notes may be used as

confirmation of the warranty commencement date. The warranty certificate

for the product must be presented by the claimant upon making a warranty

claim.

Spartherm Feuerungstechnik GmbH is not obliged to satisfy any claim if

such documentation is not presented.

8.5 WARRANTY DISCLAIMER

This warranty does not cover:

• Wear to the product

• Chamotte/vermiculite: natural products which expand and contract upon

exposure to any heating process. This can cause cracks to appear. The

firebox linings will remain fully functional, provided they are still in posi-

tion and are not broken.

• The upper surfaces: discolouration of the coating or galvanic upper sur-

faces, due to excessive thermal loading or over-heating.

• The vertical sliding mechanism: Failure to comply with installation guidelines,

resulting in over-heating of the guide rollers and bearings.

• The gaskets and seals: Reductions in sealing strength due to seal hard-

ening as a result of thermal loading.

• The glass ceramics: Soiling, due to soot or other burnt-on combustion

Chapter 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Ambiente Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Ambiente

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info