5.1 FURNITURE AND GLASS BECOMES SOOTED
HEAVILY, RAPIDLY AND UNEVENLY.
If this did not occur from the very start, please check the following points:
• Has the correct fuel been used?
• Cladding/cover correctly positioned?
5.2 FIRE IS DIFFICULT TO IGNITE
If this did not occur from the very start, please check the following points:
• Is there fuel in the burner?
• Have you wetted the ignition mats?
• Has the correct fuel been used?
5.3 UNPLEASANT ODOURS
• Fuel in a burner which is not in use?
• Cover plate in position?
• Fuel was spilt when filling the device?
5.4 APPEARANCE OF FLAMES CHANGES
• Is the burner mat damaged?
• Has the correct fuel been used?
• Were all safety distances observed?
• Is the installation space well enough ventilated?
• Is the installation site protected from transverse ventilation?
If the appearance of the flames changes noticeably, especially if the flames
begin to extend above the protective pane, stop using the device and notify
the specialist dealer!
5.5 SPILT ETHANOL IGNITES
If spilt ethanol is ignited, attempt to put out the flames immediately. Use,
for example, foam fire extinguishers with alcohol-resistant foam or suitable
fire blankets. We recommend that such extinguishing agents be kept at the
ready. Should it not be possible to extinguish the fire rapidly, the fire service
must be notified immediately and their instructions followed.
