GB 11
3.4 REFILLING THE BURNER
The burner must NOT be filled when warm or alight. DANGER TO LIFE!
Minimum waiting time between extinguishing and refilling the burner = 1
hour!
Please also leave the glass cylinders which may still be hot on the device
during this time! Risk of burn injuries!
4. CLEANING AND CARE
The ebios-fire models may only be cleaned when cold.
4.1 CLEANING CLADDING PARTS
• Wait until the device has cooled down before cleaning (at least 1 hour)!
• Decorative metal surfaces and the cladding parts can be cleaned with a
moist cloth (do not use a microfibre cloth!).
• Glass surfaces can be cleaned with a standard glass cleaner and a soft
cloth (do not use a microfibre cloth!).
• Stainless steel surfaces can be cleaned with a standard stainless steel
cleaning agent.
Remove any dust on and below the ebios-fire models regularly as dust parti-
cles can burn or char. This can cause dirt in the room and on the furnishings
where the fire is installed.
5. MAINTENANCE / TROUBLESHOOTING
• The wick and burner mat must be visually inspected at regular intervals.
The material can be easily damaged. It is not permitted to change the
wick.
• Only use our original spare parts.
• Please contact your specialist dealer should you have any questions.
5.1 UNPLEASANT ODOURS
• Fuel in a burner which is not in use?
• Fuel was spilt when filling the device?
5.2 APPEARANCE OF FLAMES CHANGES
• Is the burner surface (screen grilled) damaged?
• Has the correct fuel been used? Ethanol 96.6%
If the appearance of the flames changes noticeably, especially if the flames
begin to extend markedly, stop using the device and notify the specialist
dealer!
5.3 SPILT ETHANOL IGNITES
If spilt ethanol is ignited, attempt to put out the flames immediately. Use, for
example, CO2 fire extinguishers or appropriate fire blankets. We recommend
that such extinguishing agents be kept at the ready.
Should it not be possible to extinguish the fire rapidly, the fire service must
be notified immediately and their instructions followed.
