Bedienungsanleitung Spartherm Lean Triple (Seite 23 von 27) (Englisch)

810286

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

GB 23

7.3 WARRANTY EXTENSION TO 10 YEARS FOR THE

INITIAL PURCHASERS OF THE FIREPLACE INSERT

BODY.

Spartherm Feuerungstechnik GmbH has extended the warranty time of the

body of fireplace insert for initial purchasers from 5 to 10 years. This requires,

however, that the fireplace insert is registered online using the serial number

within six months of purchase on the homepage www.spartherm.com/Service/

7.4 WARRANTY EXCLUSION

The following in particular is excluded from the warranty:

• Product wear

• Fireclay/vermiculite

These are natural products that are subject to expansion and shrinking each

time they are heated. This can cause cracks to appear. The combustion cham-

ber linings will remain fully functional, provided they are still in position and

are not broken.

The surfaces:

• Discolouration of the coating or galvanic surfaces due to excessive thermal

loading or overheating.

The vertical sliding mechanism:

• Failure to comply with installation guidelines, resulting in overheating of

the guide rollers and bearings.

The seals:

• Reductions in sealing strength due to seal hardening as a result of thermal

The viewing panes:

• Contamination due to soot or other burnt-on residue of combustion mate-

rials and visual deterioration due to thermal loading.

• Incorrect transportation and/or incorrect storage.

• Inappropriate or careless handling of fragile components, such as glass

or ceramics.

• Incorrect handling and/or use

• Lack of maintenance

• Incorrect installation or connection of the appliance

• Failure to observe the installation and operating instructions

• Technical changes to the device by third parties Furthermore

The warranty does not cover:

• System parts which were not provided by the manufacturer

• Products containing accessories which have not been authorised by the

manufacturer

• Products which display characteristics which indicate incorrect repairs or

other interventions

7.5 WARRANTY CONDITIONS

The warranty declaration requires that the consumer/dealer accepts this war-

ranty declaration from Spartherm in writing.

This is done via:

a) Registration within 24 months as of the date of purchase on the Spartherm

homepage; go to www.spartherm.com/Service/Extended warranty and

b) presentation of the original proof of purchase for the Spartherm product

which is covered by this warranty and

c) by written error notification/presentation of the product as well as proof of

malfunctioning within the warranty period vis-à-vis Spartherm. In particular,

proof can be provided by presenting of proof of purchase.

For this warranty to be effective, correct installation and maintenance as per

the operating instructions and the recognised rules of engineering are nec-

essary, e.g. by a specialist company or authorised specialist and compliance

with the operating instructions and use of the products as per the technical

and care instructions from Spartherm.

Only components that have been produced or are recommended by Spartherm

may be used as spare parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Lean Triple Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Lean Triple

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info