Bedienungsanleitung Spartherm Linear Corner (Seite 4 von 27) (Englisch)

695377

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

GB 4

1. CERTIFIED QUALITY

OUR FIREPLACE INSERTS ARE CERTIFIED WITH A CE MARK IN ACCORD-

ANCE WITH THE TYPE TEST DEFINED IN DIN EN 13229. DECLARATION

OF PERFORMANCE IS AVAILABLE AND CAN BE VIEWED AT

WWW. SPARTHERM.COM

The locking mechanism on the model with self-closing door must not be

tampered with. Interference with the mechanism renders both the warranty

and operating licence invalid. The warranty and operating licence are also

rendered invalid if the customer modifies the technology of any other area of

the fireplace insert. The desired model should be clarified with you by your

specialist dealer before you place an order.

These operating instructions comply with the provisions outlined in EN 18896

‘Solid-fuel fireplaces’. National and regional regulations, methods of installa-

tion or materials may deviate from this version, intended only as an example,

and must be observed in all cases. Our fireplace inserts are fire areas for

sustained fires, i.e. the regular adding of fuel enables them to remain lit for

extended periods. Our fireplace inserts are not suitable for continuous fires,

i.e. ones where regular adding of fresh fuel is not required.

Naturally, our fireplace inserts are subject to our own in-house quality criteria,

from the incoming goods inspection through to final inspection prior to leaving

the factory.

1.1 CLOSING FUNCTION OF THE FIRE DOOR

The suitability of a fire area for multiple occupancy (i.e. two or more fireplaces

being connected to the same stack or chimney) depends upon whether or not

the door is self-closing:

Self-closing door function: fire area is suitable for multiple occupancy (as

described above).

No self-closing door function: multiple occupancy is not permitted, i.e. the fire

area must be connected to its own stack or chimney.

Note: when a stack or chimney has multiple fireplaces connected to it, it must

be constructed and designed in the appropriate manner.

A distinction to make is between fire places with open or closed chimneys. An

‘open chimney’ in Germany is not subject to the emission requirements defined

in 1.BImSchV, but can only be used ‘occasionally’. The manufacturer defines

the operating method for the fire area and also determines if the device can be

operated properly in an ‘open’ situation and can therefore be considered to be

an ‘open chimney’: open operation is permitted, according to the manufacturer

if the open fireplace/chimney is only used on an occasional basis. On the

other hand, the manufacturer does not permit continuous operation of an open

chimney. The manufacturer does permit operation with a closed chimney: no

restriction on operation.

Note: the old terms of ‘Type A1’ or ‘Bauart A’ that originated in the now obso-

lete standard DIN 18895 often gave rise to confusion between the aforemen-

tioned features, and therefore no longer apply today.

Without exception, Spartherm fireplace inserts must be operated in a closed

manner (intended use), i.e. with the exceptions of adding fuel or cleaning, the

doors on the fireplace insert must remain closed at all times.

Separately inspected fireplace inserts for operation with an open

fire door are highlighted in the technical data for the separate,

enclosed installation manual for fireplace inserts.

When operating in a single-occupancy chimney (i.e. one fire area

per chimney or stack) the operator is free to choose between a

self-closing fireplace insert or one on which the fire door does not

have a self-closing fire door. The operator is always responsible

for ensuring that the fire door closes in the intended manner when

the fireplace insert is in operation, and this requirement must be

observed at all times.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Linear Corner Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Linear Corner

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info