Bedienungsanleitung Spartherm Linear Triple (Seite 18 von 27) (Englisch)

695381

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

GB 18

5. SERVICE AND MAINTENANCE

CAUTION! Never clean your fireplace insert while it is hot or warm.

5.1 TYPE PLATE

The type plate can be found on your warranty certificate and on your fireplace

insert below the ash pan and/or the ash box. It includes technical data and

information. The type plate must not be removed as it confirms the testing of

the device and is required for the acceptance procedure and annual inspec-

tions by the chimney sweep.

5.2 ASH PAN AND GRATE

• Clean and empty the grate and ash pan at regular intervals, adapted to

suit your use of the fireplace. CAUTION! Ash can keep embers hot for up

to 24 hrs.

• The ash cone in the ash pan must not reach or block the slots in the grate.

• Always have the engraved side of grate facing downwards, located in the

recess in the bottom of the fireplace insert.

5.3 WINDOW

The way to ensure that your window panel remains soot free for as long as

possible is

• to use dry firewood (chapter „2.1.2 Types of wood“).

• to control combustion through adjustments to the flow of combustion air

(chapter „3. Burning“).

• to keep the fireplace insert at the highest possible combustion temperature

• to have the correct amount of draught in the chimney

• to add the right amount of wood for the operating range.

Gradual sooting up of the window is entirely normal and does not constitute

grounds for a complaint. Clean the inside of the window regularly using the

window cleaning agent provided to prevent particles of soot from burning in too

much (after approx. 8-12 operating hours)!

5.4 CLEANING AND MAINTENANCE

The fire area, the hot gas draught and the flue should be cleaned at regular

intervals. Specifically, whenever there is any extended interruption in opera-

tion of the fireplace, ensure that the chimney is not blocked.

For other conditions, refer to table:

What How often What with?

Outside of fireplace insert and

heating chamber

as required,

min. once a year

Brush, vacuum cleaner or

ash extractor

Glass pane based on fire

behaviour, for

optimum visibility, we

recommend after 8-12

hours of operation

You can easily clean the glass panel

with a commercially available cleaning

agent for fireplace glass.

Use dry cloth to wipe. No scouring.

Please do avoid that excess cleaning

agent enters between door frame and

glass panel. This might cause the

hardening of the sealing compound

between glass panel and door frame. A

hardened sealing compound might lead

to damages of door and glass.

Suitable cleaning agents for fireplace

glass are available at your specialist

dealer.

Decor finishes in

chrome or gold

as required Use dilute soapy lye and soft cloth. Do

not use abrasive agents. Do not polish!

Stainless steel surfaces as required Stainless steel cleaning product and a

soft cloth.

Painted surfaces as required Damp cloth without cleaning agent with

abrasive substances.

Hot air grille as required Duster or vacuum cleaner

Ash pan and grate as required Empty by hand or using special ash

extractor

Air space below ash pan as required Vacuum cleaner or ash extractor

Adapter between fireplace

insert and chimney

as required

min. once a year

Brush, ash extractor

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Linear Triple Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Linear Triple

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info