Bedienungsanleitung Spartherm Mini H2O (Seite 18 von 44) (Englisch)

810451

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

GB 18

2. INSTALLATION

The installation of the water-bearing components, the necessary safety

devices, etc. must always be executed by a specialised company. The

H20 must be installed in such a manner that all components, including

those that are behind the cladding, are accessible and can be checked

at all times! After setup and connection of all installations, and prior

to producing the heating chamber, the fireplace insert, as well as the

associated heating installations, must be checked for leaks through a

pressure test.

In this process, strictly ensure that the H2O fireplace insert is aligned hori-

zontally by adjusting the height of the fireplace insert feet, or that it is

aligned with a slight incline toward the vent plug.

Set-up of the H2O fireplace insert is always executed in accordance

with the installation instructions for fireplace inserts!

The structure of H2O RLU fuel cell is in addition to the data sheet for

room sealed combustion cells.

2.1 BASIC INSTALLATION REQUIREMENTS

The H2O fireplace insert must only be mounted in thermostatically

protected systems in accordance with DIN 4751 or DIN EN 12828. All

connections to the heating network must always designed so that they can

be detached (e.g. as threaded fitting). Only install temperature-resistant

pipelines in the hot area of the fireplace insert. (The hot area is approx-

imately above the beginning of the glass pane) the ambient temperature

in the hot area can be far greater than 100°C. If there is a malfunction,

damage to pipelines that are not temperature-resistant can occur. When

using sealing materials, strictly ensure adequate temperature resistance!

Due to the position of the flow connection, the temperature sensor and

bypass dampers in the front area of the fireplace insert, an opening in

the front of the heating chamber must be provided for maintenance and

repair tasks. All fittings, safety devices and electrical components must

be installed in such a manner that they can be accessed, checked and

replaced at any time.

Safety devices must not be installed in the hot area of the fireplace insert.

All water-bearing components must be protected against freezing!

When installing, the instructions in the installation and operating manuals

of the installed supplemental components must always be complied with!

For installation, connection and operation of the H2O fireplace insert, all

necessary national and European standards, as well as local regulations

(DIN, DIN EN, state construction ordinances, firing ordinances, etc.) must be

complied with and applied!

HeizAnlV: Heizungsanlagenverordnung (Heating Systems

Ordinance)

FeuVo: Feuerungsverordnung (Firing Installation Ordinance)

of the respective German Federal State

1. BlmschV Erste Verordnung zur Durchführung des Bundes-Im-

missionsschutzgesetz (First Ordinance on the

Implementation of the Federal Emissions Control

Act)

EnEV Energieeinsparverordnung (Energy Savings

Ordinance)

TR-OL Fachregeln des Kachelofen- und Luftheizungsbau

handwerks (ZVSHK) (Applicable regulations of the

German Association of Tiled Stove and Hot-Air Heat-

ing System Builders)

DIN 1298 /

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Mini H2O Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Mini H2O

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info