Bedienungsanleitung Spartherm Sino (Seite 10 von 53) (Englisch)

744237

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

GB 10

necessary combustion air pipes are open during the operation of the fireplace

insert. Simultaneous operation with a ventilation system (e.g. extractor hood,

bathroom fan, etc.) in the same room or connected space can adversely affect

the function of the stove (to the point of smoke or flue gas accumulating in the

living room, despite the firebox door being closed). It is therefore prohibited

to operate appliances of this kind simultaneously with a fireplace without first

taking appropriate precautionary measures („2.3.2.3 Room-air-independent“).

2.3.2.2 SEPARATE COMBUSTION AIR SUPPLY

The stove can be supplied with combustion air separately. The separate com-

bustion air connection can be connected to the rear side or from below. The

connecting piece is preassembled and the cladding must be opened accord-

ingly. When connecting a pipe connection to the combustion air neck, the

combustion air can be supplied to the stove from the outside or from other

rooms such as the cellar. When connecting the stove to a combustion air line,

the TROL instructions (technical rules), the DIN 18896, etc. must be observed

and applied.

In particular, ensure that the dimensions of the pipes are adequate!

When using the rotary base, the connection must be designed as

durable and flexible! The ability for it to rotate must not be affected.

The combustion air openings and lines must not be closed or blocked other than

if it has been ensured that the fireplace can only be operated with opened fas-

tening by special safety equipment. The cross-section must not be narrowed by a

fastening or a grille. This measure is not necessary with LAS chimneys. A shut-off

valve must be installed, where the combustion air feed line runs outside the build-

ing. In doing so, it must be possible to easily determine the shut-off valve setting

from outside of the connecting line. In this version, the pipe should be insulated

to prevent condensation. The pipe should be positioned, so that any condensation

formed can run out of the pipe and any water or other foreign substances from

outside cannot get into the stove. In accordance with regulations, combustion

air piping crossing a fire wall in buildings with more than two storeys must be

established in such a manner that smoke or fire cannot be transmitted to other

floors or fire compartments. Country-specific and local fire safety regulations

must be observed!

SPARTHERM QUICK COUPLING - SQC COUPLING

Compatible with the following stoves:

• Senso S

• Piko / Cubo S/M/L

• Passo XS

• Passo S/M/L

• Redoro S/M

The installation location of the stove must be determined according to the

specified technical data for the supply channel / hole. For direct wall mount-

ing, the combustion air and flue gas connection must be prepared on one

level. The stove is delivered with the fitted SQC coupling and the adjustable

feet extended. In this condition, the connecting piece is in the air, and there

is no contact to base unit. Therefore, the stove can be transported as usual

with the normal tools (e.g. sack truck).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Sino Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Sino

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info