Bedienungsanleitung Spartherm Varia H2O (Seite 4 von 44) (Englisch)

810450

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

GB 4

For better utilisation of the high flue gas temperatures a water heat

exchanger is integrated on the walls and in the flue gas manifold. A service

water storage tank, buffer tank, etc. can be heated with the generated hot

water. If these or similar system components are not available, then through

other structural measures, safe and continuous heat dissipation must be

ensured.

The fireplace must always be operated with the door closed. Modification

of the closing device is prohibited! In the connecting line to the chimney, no

other heat exchangers, coasting temperature surfaces, etc., that withdraw the

heat from the flue gas can be integrated. The H2O fireplace insert is used as

a supplemental heat generator for water heating systems in accordance

with DIN EN 12828, as the specified nominal heat output only occurs as long

as the insert is fired with nominal heat output.

The fireplace can be operated manually or with suitable combustion

controllers and appropriate settings. If necessary, consult with Spartherm

Feuerungstechnik GmbH in this regard.

Never operate the H2O fireplace inserts without water!!!

1.1 CLOSING FUNCTION OF THE COMBUSTION

CHAMBER DOOR

Suitability of the fireplace for multiple connection (two or more fireplaces on

the same chimney flue) depends on whether the door is self-closing:

Self-closing door function: Fireplace is suitable for multiple connection

No self-closing function: Multiple connection is not permitted, i.e. the fire-

place must be connected to its own chimney flue.

1. GENERAL INSTRUCTIONS

Please consult your district master chimney sweep before assem-

bling and installing the H2O - fireplace inserts. He will advise you of

building law regulations, the suitability of your chimney, and will conduct the

acceptance procedure for your fireplace insert. The chimney calculation is

executed in accordance with DIN EN 13384 with the value triplet specified

in this manual („1.3 Technical data“).

OUR FIREPLACE INSERT HAS BEEN TESTED IN ACCORDANCE WITH DIN

EN 13229 AND SATISFIES THE REQUIREMENTS STIPULATED IN THE

CONSTRUCTION PRODUCTS DIRECTIVE. (DECLARATION OF PERFOR-

MANCE IS AVAILABLE AND CAN BE VIEWED AT WWW.SPARTHERM.

COM)

Small children, elderly or infirm persons and pets: As is the case with

all heating devices, it is expedient that you attach a protective fixture for

these groups of persons, as the view pane and the cladding parts of the

fireplace can become extremely hot!

 Danger of burn injuries! 

Never touch the fireplace when the fire is burning or has just been extin-

guished! The fireplace should never be operated for an extended period of

time unattended.

IMPORTANT: The provided heat-resistant glove serves only as ther-

mal protection when activating the operating handle and the cold

hand. The glove is not fire-proof.

National and European standards, the respective state-specific and local

directives and regulations, in particular the respective firing installation

ordinance of the German Federal State, must be complied with for setup

and operation of your fireplace insert and for the connection to the chimney.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Varia H2O Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Varia H2O

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info