Bedienungsanleitung Speaka 631820 (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

552584

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

Figure 3:

When xing the mounting plate to the TV set, make absolutely certain that you

use the correct screws. Not only must these be of the correct thread type for

the TV set, but they must also not be too long; otherwise they will damage the

TV set.

The screws must not be too short, however, since otherwise the connection

will not be secure. The screws must be screwed into the threaded xture holes

on the TV set with at least 5 full 360° turns.

Should the screw length of the screws in the enclosed mounting screw set (M)

not be suitable for your TV set, please acquire suitable screws at your local

hardware store.

If you have any doubt about the correct length of the screws required, we rec-

ommend that you contact the TV manufacturer or an appropriate specialist.

Make absolutely certain that the mounting plate is mounted in the centre of the

TV set.

• Attach the base plate with suitable screws and washers from the mounting screw set (M) to

the back of your TV set.

Make sure to mount the base plate the right way round. The arrow on the base plate

with the label UP must point upward.

• If the back of your TV set is curved or if you want to mount the TV set at a greater distance

from the wall, you can insert one or two of the provided spacers (M-G) between the base plate

and the back of the TV.

• Do not use any force when tightening the screws; otherwise the TV set may be destroyed,

leading to loss of warranty/guarantee!

Figure 4:

It may be that the installation screws in the centre of the base plate need to be

loosened or tightened somewhat. To do so, use the 4 mm Allen key (H) from the

accessory set.

• Lift the TV set with the base plate on the wall bracket as shown in the image.

• The shoe of the base plate must be installed properly in its counterpiece on the wall bracket.

• Secure the base plate with the safety catch (G) to the wall bracket as shown in the image.

Figure 5:

• Tighten the two hinges of the wall bracket with the Allen keys (I and H) so that the hinges can

be moved easily but have no play. This should be repeated from time to time in later use, since

the hinge screws can become somewhat loose from moving the TV wall bracket.

• Connect the connection cables to your TV set and run them through the cable holder on the

wall mounting plate.

• Also, secure the cables with the cable holders (C and D) on the arm of the wall bracket.

When laying the cables, leave enough manoeuvring room so that the cables are not

strained or trapped when you move the wall bracket.

Figure 6:

• The TV screen can now be pivoted, tilted or turned as shown in the image.

Maintenance and care

The product does not have to be serviced and, except for occasional cleaning with a soft, dry

cloth, requires no maintenance whatsoever.

Never use aggressive cleaning agents or chemical solutions as these may damage the surfaces.

Technical data

TV size .................................. 58-107 cm (23-42”)

Load capacity ....................... max. 25 kg

VESA fastening ..................... 75x75

.............................................. 100x100

.............................................. 200x100

.............................................. 200x200

Wall distance ........................58-450 mm

Tilt angle ............................... +10/-15°

Pivot angle ............................ ±90°

Material ................................. steel

Weight .................................. 2.2 kg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Speaka 631820 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info