Bedienungsanleitung Spectra SFA3800 First Alert (Seite 9 von 20) (Englisch)

648621

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

E-8

Store Number

Store a telephone number to the phone book

Name Recording

Record a name for a telephone number in the phone book

Record Message

Record a new emergency message

Check Message

Listen to the recorded emergency message

Flash

Set the flash time.

Options are: 600, 300 (default), 270, 100 and 80ms

Tone/Pulse

Set the dialing mode between tone or pulse.

Remote Pendant

For pairing the remote pendant with your telephone (up to 5 remote

pendants can be paired)

SETTING THE CONTRAST OF THE LCD DISPLAY

1. Press the MENU BUTTON. The display shows “LCD CONTRAST”.

2. Press the DIAL BUTTON. The display shows the current contrast setting with values between 1 and 5.

3. Press  or  to select the desired contrast level and confirm with the DIAL BUTTON.

4. The display now shows to “ENTER TIME/DATE”, you can refer to next section to set the time and date or

press

button to exit the setup mode.

SETTING THE TIME AND DATE

1. Press MENU BUTTON repeatedly (or press MENU then

 buttons) until “ENTER TIME/DATE” is shown.

2. Press the DIAL BUTTON. The display shows “ENTER TIME” and the hour digits are flashing.

3. Select the correct hour using the  or  and confirm with the DIAL BUTTON. The minute digits will now

flash in the display.

4. Select the required minutes using the  or  and confirm with the DIAL BUTTON. The display now shows

“ENTER DATE” and the “month” digits are flashing.

5. Select the correct month using the  or  and confirm with the DIAL BUTTON. The “date” digits will now

flash in the display.

6. Select the correct date using the  or  and confirm with DIAL BUTTON.

7. Press

BUTTON to exit the setup mode.

SETTING THE DISPLAY LANGUAGE

1. Press MENU BUTTON repeatedly (or press MENU then

 buttons) until “LANGUAGE” is shown.

2. Press the DIAL BUTTON.

3. Select the desired display language from 11 options English, Spanish, French, Italian, German, Dutch,

Turkish, Slovenski, Portuguese, Swedish and Danish using the  or  and confirm with the DIAL BUTTON.

4. Press

BUTTON to exit the setup mode.

SETTING THE VOICE PROMPT LANGUAGE

The telephone is factory preset with all voice features ON.

The volume of the voice prompt is regulated by the SLIDE VOLUME CONTROL.

If the user does not wish to hear the voice prompts, it can turn off the voice feature.

1. Press MENU BUTTON repeatedly (or press MENU then

 buttons) until “VOICE” is shown.

2. Press the DIAL BUTTON.

3. Using the  or  to select between VOICE OFF or ON and the desired language (English, Spanish, Italian,

French) and confirm with DIAL button.

4. Press

BUTTON to exit the setup mode.

Note: The default setting for voice prompt is English, if you select other languages, the phone will announce the

phone number, digits and phone Caller ID only.

SETTING THE FLASH TIME

1. Press MENU BUTTON repeatedly (or press MENU then

 buttons) until “FLASH” is shown.

2. Press the DIAL BUTTON.

3. Select the desired flash time from 600, 300 (default), 270, 100 or 80ms using the  or  and confirm by

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spectra SFA3800 First Alert Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info