Bedienungsanleitung Spectra SFA3800 First Alert (Seite 16 von 20) (Englisch)

648621

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

E-15

VIEW THE CALLER ID RECORD

1. Press  to review more recent calls. The CALL# will decrease.

After you view the most recent data in memory, the display will show “END OF LIST”.

2. Press  to review older calls. The CALL# will increase.

After you view the oldest data in memory, the display will show “END OF LIST”.

3. If the data in memory is being reviewed for the first time, the “NEW” icon will light.

The NEW CALL INDICATOR will go OFF after you have reviewied the data.

4. If no key is pressed within 20 seconds, the LCD DISPLAY will revert to the total call counter, new call counter,

current time and date.

ERASE THE CALLER ID RECORD

1. Select the required Caller ID record using the  or  .

2. To delete a single Caller ID record, press DELETE BUTTON once. The display will show “DELETE?”. Press

DELETE BUTTON for 2 seconds. The data of that call will be erased, and the CALL# and Caller ID

information will be updated.

3. To delete all records, press and hold DELETE BUTTON until the display shows “DELETE ALL?”. Press

“DELETE BUTTON” for 2 seconds until “NO CALLS” appears on the display. Both the total call and new call

counters will become zero, and the current time and date will be displayed.

CALL BACK (REDIAL) FROM THE CALLER ID MEMORY

1. Select the required Caller ID record by pressing  or .

2. Press DIAL BUTTON, the speakerphone will turn ON automatically and dial the selected number.

1. Pick up the HANDSET or press the

BUTTON and select the required Caller ID record using  or .

2. Press DIAL BUTTON.

Note: If the Caller ID number is 10 digits, press DIAL BUTTON once, the unit will insert “1” before the Caller ID

number automatically. You can press  button to select insert “1” or not. Press DIAL BUTTON again, the

speakerphone will turn on automatically and dial the displayed number.

COPY FROM THE CALLER ID TO THE PHONE BOOK

You can copy Caller ID information to the phone book while you are reviewing the Caller ID information.

1. Select the required Caller ID memory location using  or .

2. Press and hold MENU BUTTON for two seconds, LCD DISPLAY will show “COPY TO MEMORY”.

3. Press DIAL BUTTON and “SAVED” will be shown.

TROUBLESHOOTING GUIDE

If you experience difficulties in the use of this music system please check the following or call 1-800-777-5331 for

Customer Service.

No dial tone

 Check that all phone cord connections (including the coiled handset cord) and AC Adaptor are securely

plugged into the telephone & wall jack.

 Check that the phone is in the correct dialing mode, Touch-Tone or Pulse Setting.

 Plug another phone into the jack to make sure your jack and phone service is functioning properly.

Call will not dial out or dials very slowly

 Check that the phone is in the correct dialing mode, Touch-Tone or Pulse Setting

No audible ringer

 You may have too many extensions on your line. Try unplugging a few devices. Having too many telephones

and/or accessories can also create problems such as low ringer volume or impaired quality during calls.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spectra SFA3800 First Alert Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info