Bedienungsanleitung Spektrum DX5 Pro - SPM5010 (Seite 25 von 30) (Englisch)

726854

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

SPEKTRUM DX5 PRO • TRANSMITTER INSTRUCTION MANUAL

Speciﬁ cations SR2100

Type DSMR Micro Race

Dimensions (LxWxH) 17.6 x 25.5 x 25mm

Channels 3

Weight 5.5g

Band 2.4GHz

Frame rate 11ms-5.5ms

Voltage Range 3.5–9V

Bind Button

Steering Port

Throttle Port

Aux 1 Port

The

Spektrum™ DX5 Pro bundle SPM5010 includes the SR2100

3-channel DSMR

receiver. This receiver is optimized for racing

applications and is compatible with all Spektrum DSMR surface

transmitters. The SR2100 receiver does not feature telemetry.

Install the SR2100 receiver securely where it is protected and

isolated from vibration. The SR2100 receiver has an integrated

PCB antenna in the case, and the bind button needs to be

accessible. Use double sided servo tape or hook and loop tape to

install the receiver upright with the servo connectors facing up.

Typical Electric Vehicle Installation Typical Nitro Vehicle Installation

SR2100 RECEIVER

Battery To Motor

Electronic

Speed Control

Steerin

Servo

Receiver

Steering Servo

Throttle Servo

Battery

Receiver

BINDING THE SR2100 RECEIVER TO THE DX5PRO

In order to operate, the receiver must be bound to the

transmitter. Binding is the process of programming the receiver

to recognize the GUID (Globally Unique Identiﬁ er) code of a single

speciﬁ c transmitter. When areceiver is bound to atransmitter/

model memory, the receiver will only respond to that speciﬁ c

transmitter/model memory.

Binding

1. Push and hold the bind button on the receiver while

powering up the receiver. The orange LED will ﬂ ash

continuously, indicating that the receiver is in bind mode.

2. With all channels in the desired preset failsafe position

(normally neutral), put the DX5 Pro in bind mode. Continue

holding the failsafe position until the binding process is

complete.

3. The bind process is complete when the orange LED on the

receiver is solid.

CAUTION: When the bind process is complete, the

throttle and steering channels are active. Keep hands

and loose objects away from all spinning parts on the vehicle.

You must rebind the transmitter and receiver if you:

• Change the servo reverse after binding.

• Want to use the receiver with a different model memory.

• Are using the receiver with a DSMR transmitter and you

change the frame rate in the transmitter.

Aux Channel

The Aux servo channel is not operable when the SR2100

receiver is operating in 5.5ms mode. If 5.5ms frame rate is

selected in the transmitter, only two channels, Steering and

Throttle, are operational.

Add - Aux channel can be used to operate an additional channel,

personal transponder or a fan. To use a transponder and fan at

the same time a Y-Harness (SPM1516) would be required.

57840 SPM DX5 Pro DSMR Tx Manual_BOOK 2557840 SPM DX5 Pro DSMR Tx Manual_BOOK 25 4/26/18 2:56 PM4/26/18 2:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX5 Pro - SPM5010 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX5 Pro - SPM5010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info