XE Series Elliptical
17
Using the Up/Down keys, highlight the Manual icon at the top of the display and press
Mode key. The profile will be blinking and you may use the Up/Down keys to adjust the
program work level and then press Mode. The Time window will now be blinking. Use the
Up/Down keys to adjust the program Time and then press Mode. The Distance window will
now be blinking and you can adjust a target Distance using the Up/Down keys then press
Mode. Calories will now be blinking, repeat the same process as above to set, then press
Mode. The Watt icon will be blinking. If you choose to set the Watts then the machine will
automatically adjust the workload to maintain continuous work. What this means is that if
you set the Watt to 100 the machine will try to keep you working at a rate of work that
equals 100 Watts (or working at a rate that will keep a 100 Watt light bulb burning). Watts
are determined by the amount of work you are doing. On the ZE50 Elliptical this means the
speed you are pedaling at combined with the workload of the machine. In Watt mode, if you
change your speed the machine will automatically change the workload to maintain the
same Watt level. If you pedal faster the workload will decrease and if you pedal slower the
workload increases.
After adjusting all the parameters, press Start to begin your workout.
Preset Programs
There are 12 preset programs to choose from. After power up, or reset, press the Up/Down
keys to highlight the Program icon. Press the Mode key to enter the program mode. The
display will show P1, for two seconds, then change to the P1 program profile. You may
keep pressing the Up/Down keys to scroll through the 12 programs. When you see a
program you want, press the Mode key to enter. At this point you may press start to begin
the program with the default settings or you may customize the program.
To customize the work level, press the Up key. You will see the profile increase in size.
When the work level is where you like it press the Mode key (If you do not want to
customize the profile, just press the Mode key to bypass).
The Time window will now be blinking. Use the Up and Down keys to adjust the workout
time and then press Mode.
The Distance window will now be blinking. Repeat the same process to set the distance to
count down, if desired, and press Mode.
The Calorie window will now be blinking. Repeat the same process then press Mode.
The Pulse window will now be blinking. Entering a Pulse number will set an alarm that will
beep when your heart rate reaches the programmed number to let you know you have
reached your target.
Once you have set the data you may press Start to begin the program. You may also press
Start at any time during the programming to begin. Any data that is not programmed at that
point will count up from zero.
When the program ends there is a series of audible beeps. You may press Start to restart
the program or press Reset to return to the start-up screen.
User Program
