583961
12
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
8
Elliptical T
rainer
XE295
1. Mate the Connecting Arm Covers (R) (58) with the Connecting Arm Covers (L) (58-1) on left and right
Connecting Arms (8 & 9). Make sure these covers are oriented the correct way. There is an arrow ^ mark on
the inside. Fasten together with four Phillips Head Screws (105) and four Sheet Metal Screws (87). Tighten with
the Short Phillips Head Screw Driver (107). Then mate the Connecting Arm Covers (R) (57) with (L) (57-1)
on Swing Arm (L) (10) and Swing Arm (R) (11), respectively. Fasten together with four Phillips Head Screws
(105) and four Sheet Metal Screws (87). Tighten with the Short Phillips Head Screw Driver (107).
2. Fasten the two Wheel Covers (52) to the roller sets with four Phillips Head Screws (105). Tighten with the
Phillips Head Screw Driver(108).
3. Attach the left side cover (19) and right side cover (20) to the mid-stabilizer tube with two Phillips Head
Screws (105). Attach the right side cover (20) and left side cover (19) to the rear stabilizer tube with two
Phillips Head Screws (105). Tighten all four screws with the Phillips Head Screw Driver (108). Then attach the
Front Stabilizer Cover (49) with two Phillips Head Screws (105). Tighten with the Phillips Head Screw Driver
(108).
4. Install the Front Handle Bar Covers (L & R) (54 & 55) and Rear Handle Bar Covers (L & R) (54-1 & 55-1)
over the Handle Bars axle connections with four Sheet Metal Screws (87) on each side. Tighten with the Phillips
Head Screw Driver (108).
5. Look closely at the four oor levelers underneath the middle and rear of the elliptical. If any of these aren’t
in contact with the oor, use the wrench (124) to loosen the bottom nut. Once the nut has been loosened,
turn the rubber pad clockwise until it makes solid contact with the oor. Retighten the bottom nut to prevent it
from moving.
HARDWARE
STEP 4: Plastic Parts
#87. 3.5 x 12mm
Sheet Metal Screw
(16 pcs)
#105. M5 x15mm
Phillips Head Screw
(18 pcs)
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Spirit XE295 2011-2012 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info