Bedienungsanleitung Spirit XE350 2005 (Seite 33 von 35) (Englisch)

584193

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

XE Series Elliptical

How to wear your wireless chest strap transmitter:

1. Attach the transmitter to the elastic strap using the locking parts.

2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain

comfortable.

3. Position the transmitter with the Spirit logo centered in the middle of your body facing

away from your chest (some people must position the transmitter slightly left of center).

Attach the final end of the elastic strap by inserting the round end and, using the locking

parts, secure the transmitter and strap around your chest.

4. Position the transmitter immediately below the pectoral muscles.

5. Sweat is the best conductor to measure very minute heart beat electrical signals.

However, plain water can also be used to pre-wet the electrodes (2 black square areas on

the reverse side of the belt and either side of transmitter). It’s also recommended that you

wear the transmitter strap a few minutes before your work out. Some users, because of

body chemistry, have a more difficult time in achieving a strong, steady signal at the

beginning. After “warming up”, this problem lessens. As noted, wearing clothing over the

transmitter/strap doesn’t affect performance.

6. Your workout must be within range - distance between transmitter/receiver – to achieve

a strong steady signal. The length of range may vary somewhat but generally stay close

enough to the console to maintain good, strong, reliable readings. Wearing the transmitter

immediately against bare skin assures you of proper operation. If you wish, you may wear

the transmitter over a shirt. To do so, moisten the areas of the shirt that the electrodes will

rest upon.

Note: The transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it

automatically deactivates when it does not receive any activity. Although the transmitter is water resistant,

moisture can have the effect of creating false signals, so you should take precautions to completely dry the

transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement

battery is Panasonic CR2032.

Erratic Operation:

Caution! Do not use this elliptical for Heart Rate Control unless a steady, solid

Actual Heart Rate value is being displayed. High, wild, random numbers being

displayed indicate a problem.

Areas to look for interference which may cause erratic heart rate:

(1) Microwave ovens, T.V.’s, small appliances, etc.

(2) Fluorescent lights.

(3) Some household security systems.

(4) Perimeter fence for a pet.

(5) Some people have problems with the transmitter picking up a signal from their skin. If

you have problems try wearing the transmitter upside down. Normally the transmitter will

be oriented so the Spirit logo is right side up.

(6) If you continue to experience problems contact your dealer.

Heart Rate Control Program 1 & 2 (HR 1, HR 2) operation

Using a Heart Rate Transmitter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spirit XE350 2005 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info