Bedienungsanleitung Spirit Z100 2006 (Seite 18 von 24) (Englisch)

584063

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Z100. / Z500 / Z900

How to wear your wireless chest strap transmitter:

1. Attach the transmitter to the elastic strap using the locking parts.

2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain comfortable.

3. Position the transmitter with the Spirit logo centered in the middle of your body facing away from

your chest (some people must position the transmitter slightly left of center). Attach the final end of

the elastic strap by inserting the round end and, using the locking parts, secure the transmitter and

strap around your chest.

4. Position the transmitter immediately below the pectoral muscles.

5. Sweat is the best conductor to measure very minute heart beat electrical signals. However, plain

water can also be used to pre-wet the electrodes (2 black square areas on the reverse side of the

belt and either side of transmitter). Its also recommended that you wear the transmitter strap a few

minutes before your work out. Some users, because of body chemistry, have a more difficult time

in achieving a strong, steady signal at the beginning. After warming up, this problem lessens. As

noted, wearing clothing over the transmitter/strap doesnt affect performance.

6. Your workout must be within range - distance between transmitter/receiver  to achieve a

strong steady signal. The length of range may vary somewhat but generally stay close enough to

the console to maintain good, strong, reliable readings. Wearing the transmitter immediately

against bare skin assures you of proper operation. If you wish, you may wear the transmitter over

a shirt. To do so, moisten the areas of the shirt that the electrodes will rest upon.

Note: The transmitter is automatically activated when it detects activity from the users heart. Additionally, it

automatically deactivates when it does not receive any activity. Although the transmitter is water resistant, moisture

can have the effect of creating false signals, so you should take precautions to completely dry the transmitter after

use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement battery is Panasonic

CR2032.

Erratic Operation:

Caution! Do not use this treadmill for Heart Rate Control unless a steady, solid Actual Heart

Rate value is being displayed. High, wild, random numbers being displayed indicate a

problem.

Areas to look for on interference:

(1) Treadmill not properly grounded - A must!

(2) Microwave ovens, T.V.s, small appliances, etc.

(3) Fluorescent lights.

(4) Some household security systems.

(5) Perimeter fence for a pet.

(6) Loose treadmill console / upright.

WARNING!

DO NOT USE THE HEART RATE CONTROL PROGRAM IF YOUR HEART RATE IS NOT

REGISTERING PROPERLY ON THE TREADMILL’S DISPLAY!

Special Operations of Heart Rate Functions:

All Spirit treadmills that are factory equipped with a Heart Rate Control system have many distinct

features both in the Heart Rate Control program and during heart rate monitoring. This section

will give you a more detailed background to use your treadmill in the most effective manner.

Using a Heart Rate Transmitter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spirit Z100 2006 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info