Bedienungsanleitung Sportline 4204 (Seite 1 von 2) (Englisch)

575640

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

BUTTONS AND THEIR FUNCTIONS2- REMOVING BATTERY INSULATOR TAB 3- BUTTONS AND THEIR FUNCTIONS

1- INTRODUCTION

4204 PEDOMETER

USER GUIDE

/INSTRUCTION MANUAL

Congratulations on your purchase of a Sportline 4204 Pedometer. The 4204

Pedometer features a highly advanced pedometer technology that accurately

measures your body movements when worn from multiple locations on the body

and in multiple orientations.

Please keep in mind your pedometer is a sensitive technical instrument. With

proper care and maintenance, it will last for many years. However, improper care

and handling can cause the various sensors to be damaged and to stop function-

ing.

HOW TO USE THIS MANUAL

Please read all sections of this manual carefully and become fully familiar with

the operation of the pedometer before using it in the ﬁ eld. Proper setup and op-

eration will greatly enhance the pedometer’s usefulness and your enjoyment. The

steps for the programming or operation are adjacent to the screen illustration.

Key points and important information are shown in highlighted blocks.

CUSTOMER SUPPORT

If you have questions, comments or need assistance with your Sportline

Pedometer, you may contact Customer Support by calling 1-866-694-4575.

NOTE: In order to activate your pedometer after purchase, you must remove the

battery insulator tab inside the battery compartment.

1. Locate the tab on the lower edge of the pedometer.

2. Firmly grasp the tab and pull away from the pedometer until completely

removed from the unit.

3. Remove the label that appears on the pedometer display.

4204 PEDOMETER

www.sportline.com

Sportline® is a trademark of SPORTLINE, a division

of EB Sport Group, Yonkers, NY 10701

Distributed in the UK by

EB Brands (UK), Worcester, WR4 9FA

SB1062IS01SPO

5- PROGRAMMING THE PEDOMETER

4. Adjust Height by PRESSING the + or - buttons. PRESS the SET button to accept

value. The unit will automatically calculate your Stride Length.

5. PRESS the SET button to accept this value or you can adjust your Stride Length

(see “Determining Stride Length” on the opposite page) by PRESSING the + or

MODE buttons.

6. PRESS the SET button. The unit is now programmed and ready for use!

4- PROGRAMMING THE PEDOMETER

In order to ensure exercise data is as accurate as possible, you must complete the

following steps to enter your personal proﬁ le. The display will prompt you what

information is being programmed. Adjust information by PRESSING + (to increase)

OR MODE/RESET (MODE) (to decrease). Accept value and advance to the next setting

by PRESSING SET.

1. Enter the Programming Sequence by PRESSING & HOLDING the SET button on

the back of the unit for approximately 3 seconds.

2. Select unit of measure (metric or imperial) by PRESSING the + or MODE buttons.

PRESS the SET button, accept and advance to set Weight.

3. Adjust Weight (in pounds or kilograms) by PRESSING the + (to increase) or MODE

(to decrease) buttons. PRESS the SET button to accept value and advance to set

Height.

6- VIEWING PEDOMETER INFORMATION 7- RESETTING PEDOMETER DATA

The 4204 Pedometer automatically begins capturing data once movement

occurs. There are no Start or Stop buttons to push.

Scroll between display modes: STEPS and DISTANCE (MILES) by PRESSING THE

MODE BUTTON.

TO CLEAR ALL CURRENT PEDOMETER DATA:

1. PRESS & HOLD the MODE/RESET button on the front of the unit.

2. Continue holding as the display reads “RESET”.

3. When pedometer data reads zeros (O), RELEASE THE MODE/RESET button.

The unit is now ready for a new workout.

NOTE: Your personal proﬁ le settings will be saved.

1 2

The Sportline 4204 Pedometer has 3 buttons for operating and programming:

MODE/RESET (located on the front of the unit left of the display) and on the back

panel of the unit, the SET and the + (Adjust/increase) buttons.

MODE/RESET (MODE) BUTTON

• Operating Mode: Scrolls through display modes.

• Press & Hold: Resets pedometer data.

• Programming Mode: Adjusts (decreases) information being adjusted.

SET BUTTON

• Operating Mode: Press & Hold to enter the Programming Sequence.

• Programming Mode: Accepts the information being adjusted and advances to

the next setting.

+ (ADJUST/INCREASE) BUTTON

• Programming Mode: Adjusts (increases) information being adjusted.

1 2

To adjust value:

PRESS + or MODE/RESET

To accept and advance:

PRESS SET

To adjust value:

PRESS + or MODE/RESET

To accept and advance:

PRESS SET

Scroll through display

modes:

PRESS MODE/RESET

STEPS

EXERCISE TIME CALORIES

DISTANCE

SB106 2IS01SPO

5/3 1 /1 2

Maria

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sportline 4204 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info