Bedienungsanleitung Spypoint Tiny-W3 (Seite 30 von 45) (Englisch)

569578

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Troubleshooting • Camera

Problem Possible solutions

Impossible to

turn on the

camera

• Verify if there are batteries in the camera.

• Verify if the batteries are correctly installed (p.9).

• Verify if the battery switch position is positioned

according to the power source (p.9).

• Install the latest update (available on www.spypoint.

com under SUPPORT section.

• Replace alkaline batteries or recharge the lithium

battery pack.

The screen of the

camera turns off

• The camera may be set to PHOTO or VIDEO mode

and the screen turns off after a period of 60 seconds

in order to preserve battery life.

• The camera automatically resets itself to PHOTO or

VIDEO mode (depending of the latest mode used

or selected) after 2 minutes of inactivity on the main

menu.

• To return to the screen, turn off the camera and turn

it on again.

The camera beeps • Insert a memory card (p.13).

The camera does

not respond

• Remove the batteries and reinstall them (p.9).

• Replace alkaline batteries or recharge the lithium

battery pack.

The camera

works, but is

losing its time

and date settings

• The time battery must be replaced (p.9).

Impossible to

take photos/

videos

• Verify if there are batteries in the camera.

• Replace alkaline batteries or recharge the lithium

battery pack.

• Memory card is full.

• Verify if the camera is turned on.

No person/animal

on photos

• Sunrise or sunset can trigger the sensor. Camera

must be re-orientated.

• At night, the motion detector may detect beyond the

range of the IR illumination. Reduce sensibility

setting (p.17).

• Small animals may trigger the unit. Reduce sensibi-

lity setting (p.17) and/or raise height of camera.

• Motion detector may detect animals through foliage.

• If a person or animal moves quickly, it may move out

of the camera’s eld of view before the photo is

taken. Move the camera further back or redirect the

camera.

• Make sure the mounting post or tree is stable and

does not move.

Red light in front

of the camera

blinks

• Camera is set in TEST mode.

• Camera is set in PHOTO or VIDEO mode. The red

light in front of the camera ashes for 60 seconds to

allow the user to leave without being photographed

or recorded.

The photos/

videos do not

appear on the

television

• Verify if the camera is correctly connected to the

television using the RCA cable (p.20).

• Verify if the memory card contains photos/videos.

The computer

does not

recognize the

camera

• Verify if the camera is properly connected to the

computer using the USB cable (p.28).

The computer

can’t play videos

• The .MP4 video format requires the use of a video

player software compatible such as VLC, Windows

Media Player or QuickTime.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spypoint Tiny-W3 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spypoint Tiny-W3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info